Am Samstag Mai 29 2010 schrieben Sie: > 2010/5/29 Claudia Neumann <[email protected]>: > > Am Samstag Mai 29 2010 schrieb Ludovic Rousseau: > >> 2010/5/29 Claudia Neumann <[email protected]>: > >> > Hi all! > >> > > >> > The Kobil KAAN Advanced can read the new german electronic health card > >> > (elektronische Gesundheitskarte eGK) but not the older german health > >> > insurance card (Krankenversichertenkarte KVK) which is mainly in use > >> > today. > >> > > >> > In Windows the Kobil KAAN Advanced reads both cards. > >> > > >> > I think I remember that some older version of pcsc could read the KVK. > >> > > >> > My system: > >> > Linux 2.6.26-2-686 GNU/Linux > >> > Debian Lenny 5.0.4 > >> > libpcsclite-dev 1.6.0-2 > >> > libpcsclite1 1.6.0-2 > >> > pcscd 1.6.0-2 > >> > libccid 1.3.12-1 > >> > > >> > The following log shows first reading a eGK und then the failure with > >> > the KVK. > >> > > >> > --------------------------------------------- > >> > Compac-deb:/etc/init.d# pcscd --foreground --debug --apdu > >> > > >> > 03629004 ifdhandler.c:1090:IFDHPowerICC() action: PowerUp, > >> > usb:0d46/3002:libhal:/org/freedesktop/Hal/devices/usb_device_d46_3002_ > >> >E_0 8C301051_if0 (lun: 0) > >> > 00000026 -> 000000 62 00 00 00 00 00 5E 00 00 00 > >> > 00022169 <- 000000 80 00 00 00 00 00 5E 41 FE 00 > >> > 00000022 commands.c:225:CmdPowerOn Card absent or mute > >> > >> The reader can't powering up the card. > >> The Windows driver may do something special to use this card. > >> > >> Can you try this card with a reader from another manufacturer? > > > > Yes, the KVK works with the Cherry ST-2052. But I got special libs from > > Cherry (or rather SCM): > > libctpcsc.so.1.0.9.kv2 > > libmcscm.so.4.07-rc1 > > libscmccid.so.5.0.11 > > Pcscd andd libpcsclite are used as well. > > Want logs? > > > > I tried the libs with the Kobil KAAN Advanced. But that didn't work. > > Memory cards (or synchronous cards) are not supported by PCSC.
No chance to get it supported? > I now understand why your application is using some unknown > SCardControl() commands. Your application expects a special driver. > You can't use my CCID driver for that. Is there another driver which could get it going? Best regards Claudia Neumann _______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
