>Could you compile and try to use the mvprelay from my web page at >www.mvpmc.org/~mvallevand (they are both the same source I found the >online mvprelay didn't work reliably for me either)
Martin, Thanks for getting back to me so soon. I tried the mvprelay identified above and sadly still have the same issue. Tried to use the Linux box with Router DHCP, did not work. Tried to use the Hauppauge software to pass the dongle.bin and connect to Linux box, did not work. Reset the dongle.bin with the Hauppauge dongle.bin, then tried using the Linux box only with DHCP, tftp, mvpmc dongle.bin and DNS setup, did not work. I also tried using the Hauppauge software in combination with a Linux DHCP, DNS, and tftp server, again no luck. Is there any way to tell or monitor if the dongle.bin has been loaded (in each of the above situations I could not telnet to the MVP box either)? Anytime I select the Linux box from the MediaMVP Preferred Server screen or bypass that step, I end up with "failed to locate GUI server"/"contacting servers" endless cycle. I just do not understand it. The only recommendation for that situation I was able to find is to insure that you were not using links in the /tftpboot directory. All my files in that location are full rwx and originals. I also double checked and tested my tftp setup again, which seems to be working as expected. If it is any help whatsoever, I can get the GB-PVR software to work consistently with my MVP H3. Frank ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Mvpmc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mvpmc-users mvpmc wiki: http://mvpmc.wikispaces.com/
