Hello!
I used 0.16 without to many problems. I upgraded to 0.17 today, but after the upgrade I have no sound when watching LiveTV or Recordings. If I mount the file system where the ring buffer is located on another machine, I can hear the sound which tells me that it's not a problem when encoding the stream.
If I run mplayer on the machine the sound works great.
My second problem is that mythfilldatabase gives me the following error:
# mythfilldatabase
Grabbing XMLTV data using tv_grab_sn is not verified as working.
Grabbing XMLTV data using tv_grab_sn is not verified as working.
Adjusting program database end times...
0 replacements made.
Marking repeats...found 0
Unmarking repeats from grabber that fall within our new episode window...found 0
2005-02-11 23:06:17.423 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5)
2005-02-11 23:06:17.430 Using protocol version 14
My Third problem is that mythfrontend is not controllable from the IR remote anymore. I've seen that other people have the same problem when upgrading to 0.17.
My fourth problem is that recently MythTV (ivtv or the machine itself) got very instable. I can record a program and watch divx and MPEG-2 with mplayer without any problems, however when watching and/or pausing liveTV the machine can freeze without reason.
Any ideas where to start looking?
My hardware: I have an AMD Sempron 2400+ Asus A7V8X-X Hauppauge PVR-350 Sparkle NVIDIA GForce4 MX 4000
# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0b.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:0e.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0185 (rev c1)
# dmesg
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1666.5119 MHz.
..... host bus clock speed is 333.3024 MHz.
cpu: 0, clocks: 3333024, slice: 1666512
CPU0<T0:3333024,T1:1666512,D:0,S:1666512,C:3333024>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
00:00:07[A] -> 2-17 -> IRQ 17 level low
00:00:09[A] -> 2-18 -> IRQ 18 level low
00:00:0c[A] -> 2-19 -> IRQ 19 level low
00:00:0c[B] -> 2-16 -> IRQ 16 level low
00:00:10[A] -> 2-21 -> IRQ 21 level low
00:00:11[C] -> 2-22 -> IRQ 22 level low
00:00:12[A] -> 2-23 -> IRQ 23 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 C1
11 001 01 1 1 0 1 0 1 1 A9
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 0C8 08 1 0 0 0 0 0 2 12
15 001 01 1 1 0 1 0 1 1 C9
16 001 01 1 1 0 1 0 1 1 D1
17 001 01 1 1 0 1 0 1 1 D9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: No IRQ known for interrupt pin A of device 00:11.1
PCI: Using ACPI for IRQ routing
PCI: Via IRQ fixup for 00:10.0, from 0 to 5
PCI: Via IRQ fixup for 00:10.1, from 0 to 5
PCI: Via IRQ fixup for 00:10.2, from 0 to 5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
hda: ST340810A, ATA DISK drive
blk: queue c03b7980, I/O limit 4095Mb (mask 0xffffffff)
hdc: TSSTcorpDVD-ROM TS-H352A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
es1371: version v0.32 time 10:04:39 Jan 30 2005
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 344k freed
Real Time Clock Driver v1.10f
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Adding Swap: 522104k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2002 Netfilter core team
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xb000, 00:11:2f:ca:c5:79, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-core.o: driver tveeprom registered.
lirc_dev: IR Remote Control driver registered, at major 61
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
i2c-core.o: driver i2c ir driver registered.
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
i2c-core.o: driver i2c tda9887 driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
i2c-core.o: driver i2c msp3400 driver registered.
i2c-core.o: driver saa7115 registered.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3e) loading
ivtv: Linux version: 2.4.29
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
PCI: Enabling device 00:0e.0 (0014 -> 0016)
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7672126
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[0],ok]
i2c-core.o: client [tveeprom[0]] registered to adapter [ivtv i2c driver #0](pos. 0).
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach [client=Hauppauge IR,ok]
i2c-core.o: client [Hauppauge IR] registered to adapter [ivtv i2c driver #0](pos. 1).
lirc_dev: lirc_register_plugin:sample_rate: 10
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
i2c-core.o: client [tda9887] registered to adapter [ivtv i2c driver #0](pos. 2).
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver #0](pos. 3).
msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Feb 4 2005 20:20:41
msp34xxg: set source to 3 (0x320)
msp34xxg: current mode: 5.5/5.85 B/G NICAM FM (0x0008)
msp34xxg: unmute
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00
ivtv: i2c attach [client=MSP3418W-B3,ok]
i2c-core.o: client [MSP3418W-B3] registered to adapter [ivtv i2c driver #0](pos. 4).
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
i2c-core.o: client [saa7115[0]] registered to adapter [ivtv i2c driver #0](pos. 5).
saa7115: status: (1E) 0x40, (1F) 0xc0
i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0.
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
saa7127: video encoder driver version V 0.3 loaded
i2c-core.o: driver saa7127 registered.
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
i2c-core.o: client [saa7127[0]] registered to adapter [ivtv i2c driver #0](pos. 6).
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: ivtv_enc_thread: pid = 1085, itv = 0xd08c26a0
ivtv: ivtv_dec_thread: pid = 1086, itv = 0xd08c26a0
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
msp34xx: MSP_SET_MATRIX
msp34xx: scart switch: in1 da => 1
ivtv: Switching standard to PAL.
msp34xx: VIDIOCSCHAN
msp34xx: switching to TV mode
msp34xxg: set source to 3 (0x320)
msp34xxg: current mode: 5.5/5.85 B/G NICAM FM (0x0008)
msp34xxg: unmute
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
msp34xx: VIDIOCGAUDIO
msp34xx: VIDIOCSAUDIO
msp34xx: VIDIOCSAUDIO setting va->volume to 58880
msp34xx: VIDIOCSAUDIO setting va->balance to 32768
msp34xx: VIDIOCSAUDIO setting va->flags to 31
msp34xx: VIDIOCSAUDIO setting msp->left to 58880
msp34xx: VIDIOCSAUDIO setting msp->right to 58880
msp34xx: VIDIOCSAUDIO setting msp->bass to 32768
msp34xx: VIDIOCSAUDIO setting msp->treble to 32768
msp34xx: VIDIOCSAUDIO setting msp->mode to 0
msp34xx: setvolume: mute=on 58880:58880 v=0x00 b=0x00
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
saa7115: decoder disable output
msp34xx: VIDIOCSFREQ
msp34xxg: set source to 3 (0x320)
msp34xxg: current mode: 5.5/5.85 B/G NICAM FM (0x0008)
msp34xxg: unmute
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp34xx: setvolume: mute=on 58880:58880 v=0x00 b=0x00
saa7115: decoder enable output
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004
msp34xx: VIDIOCGAUDIO
msp34xx: VIDIOCSAUDIO
msp34xx: VIDIOCSAUDIO setting va->volume to 58880
msp34xx: VIDIOCSAUDIO setting va->balance to 32768
msp34xx: VIDIOCSAUDIO setting va->flags to 30
msp34xx: VIDIOCSAUDIO setting msp->left to 58880
msp34xx: VIDIOCSAUDIO setting msp->right to 58880
msp34xx: VIDIOCSAUDIO setting msp->bass to 32768
msp34xx: VIDIOCSAUDIO setting msp->treble to 32768
msp34xx: VIDIOCSAUDIO setting msp->mode to 0
msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
cmpci: version $Revision: 5.64 $ time 10:08:14 Jan 30 2005
PCI: Enabling device 00:0b.0 (0084 -> 0085)
cmpci: found CM8738 adapter at io 0xd800 irq 19
cmpci: chip version = 055
Regards // Magnus
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
