>From what I can tell the tuner module is not being loaded. BTTV detects the card just fine. The computer is a Compaq Evo D500 small form factor. It contains a Geforce 4 mx440 in the agp slot, the first pci slot has a netgear 802.11g wireless card in it. the second pci slot has the WinTV Go Plus card in it. I think I just need to track down what kind of tuner this card has on it and set that option properly. If there are any other ideas that wuld be great.
On Fri, 2005-02-18 at 22:55 -0600, Robert Denier wrote: > I'm going to suggest you enumerate your entire setup in minute detail > including details of your distribution, motherboard, and add in cards in > your system. I'd also suggest possibly adding the output of 'lspci -vv' > somewhere. How do you have the board connected? You say you get > static. It sounds to me like the tuner is doing _something_. Is your > tv standard correct? Does a tv hooked up there work? Have you tried > using the composite input from a vcr perhaps? (If it has one.) > > Basically if you don't know what the problem is just start guessing and > trying things. Quite often thats the quickest way of solving > complex computer problems since sometimes their are only a finite > number of ways to do something and in the process of trying things, you > may learn something to take a better guess. > > Good luck > > On Fri, 2005-02-18 at 21:36 -0700, R. Keith Smith wrote: > > I just rebuilt my machine and put only tvtime on it. Same problem. > > Nothing is being detected when I scan for channels. > > > > On Fri, 2005-02-18 at 21:28 -0600, Robert Denier wrote: > > > I had problems with xaw i think. I can't remember what they were. It > > > might have been a problem with the ebuild compiling.. You might try > > > tvtime. I'm using it and the 2.6.10 kernel at it works. > > > > > > > > > On Fri, 2005-02-18 at 20:28 -0700, R. Keith Smith wrote: > > > > I have tried xawtv and kdetv and they have the same problem. I should > > > > have put that in the first email. sorry. > > > > > > > > On Fri, 2005-02-18 at 21:18 -0600, Robert Denier wrote: > > > > > I'd install a program like tvtime or another simple tv tuner program > > > > > and > > > > > get that working right first.. In general when troubleshooting you > > > > > always go to a simpler setup so as to be able to isolate problems > > > > > easier. > > > > > > > > > > > > > > > On Fri, 2005-02-18 at 18:53 -0800, [EMAIL PROTECTED] wrote: > > > > > > I am setting up Mythtv on my Mepis (debian based) box. Everything is > > > > > > working but I can not get the tuner to work. I have a WinTV Go > > > > > > card. I can > > > > > > change channels but get nothing but static. I run scantv and it > > > > > > comes up > > > > > > with nothing. I have no idea what to do from here. Help please. > > > > > > > > > > > > Keith > > > > > > _______________________________________________ > > > > > > mythtv-users mailing list > > > > > > [email protected] > > > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > > > > > _______________________________________________ > > > > > mythtv-users mailing list > > > > > [email protected] > > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > _______________________________________________ > > > > mythtv-users mailing list > > > > [email protected] > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > _______________________________________________ > > > mythtv-users mailing list > > > [email protected] > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
