Anyone have any ideas on this one? I am really stuck.
> I need a bit of help. I recently upgraded to FC2 and
> installed the new mythtv .17 from atrpms. Everything is
> working fine except for one thing. I no longer get any output
> from mythtv on my sp/dif output. I have a good .asoundrc
> installed and it plays fine if I do something like 'mplayer
> /dev/video0'. I used to have to put 'ALSA:default' in for the
> audio device but this no longer works. Does anyone know how
> to get myth to output to the alsa device again??
>
> Thanks in advance,
> Bill
>
> PS - Here is my .asoundrc file just in case i screwed it up...
>
>
> # Override the default output used by ALSA.
> # If you do not override the default, your default
> # device is identical to the (unmixed) analog device
> # shown below. If you prefer mixed and/or digital
> # output, uncomment the appropriate four lines below
> # (only one slave.pcm line).
> pcm.!default {
> type plug
> ## Uncomment the following to use mixed analog by default
> # slave.pcm "dmix-analog"
> ## Uncomment the following to use unmixed digital by default
> # slave.pcm "digital-hw"
> ## Uncomment the following to use mixed digital by default
> slave.pcm "dmix-digital"
> }
>
> # Alias for analog output on the nForce2 (hw:0,0)
> # - This is identical to the device named "default"--which
> # always exists and refers to hw:0,0 (unless overridden)
> # - Therefore, we can specify "hw:0,0", "default", or
> "analog" # to access analog output on the nForce2 pcm.analog
> { type plug slave.pcm "analog-hw" }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.analog {
> type hw
> card 0
> }
>
> # Alias for (rate-converted) mixed analog output on the
> # nForce2 (hw:0,0)
> # - This will accept audio input--regardless of rate--and
> # convert to the rate required for the dmix plugin
> # (in this case 48000Hz)
> pcm.mixed-analog {
> type plug
> slave.pcm "dmix-analog"
> }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.mixed-analog { type hw card 0 }
>
> # Alias for (rate-converted) digital (S/PDIF) output on the
> # nForce2 (hw:0,2)
> # - This will accept audio input--regardless of rate--and
> # convert to the rate required for the S/PDIF hardware
> # (in this case 48000Hz)
> pcm.digital {
> type plug
> slave.pcm "digital-hw"
> }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.digital {
> type hw
> card 0
> }
>
> # Alias for mixed (rate-converted) digital (S/PDIF) output on
> the # nForce2 (hw:0,2) # - This will accept audio
> input--regardless of rate--and # convert to the rate required
> for the S/PDIF hardware # (in this case 48000Hz)
> pcm.mixed-digital { type plug slave.pcm "dmix-digital" }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.mixed-digital { type hw card 0 }
>
> # The following devices are not useful by themselves. They
> # require specific rates, channels, and formats. Therefore,
> # you probably do not want to use them directly. Instead use
> # of of the devices defined above.
>
> # Alias for analog output on the nForce2 (hw:0,0)
> # Do not use this directly--it requires specific rate,
> # channels, and format
> pcm.analog-hw {
> type hw
> card 0
> # The default value for device is 0, so no need to specify
> }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.analog-hw { type hw card 0 }
>
> # Alias for digital (S/PDIF) output on the nForce2 (hw:0,2)
> # Do not use this directly--it requires specific rate,
> # channels, and format
> pcm.digital-hw {
> type hw
> card 0
> device 2
> }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.digital-hw { type hw card 0 }
>
> # Direct software mixing plugin for analog output on
> # the nForce2 (hw:0,0)
> # Do not use this directly--it requires specific rate,
> # channels, and format
> pcm.dmix-analog {
> type dmix
> ipc_key 1234
> slave {
> pcm "analog-hw"
> period_time 0
> period_size 1024
> buffer_size 4096
> rate 48000
> }
> }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.dmix-analog { type hw card 0 }
>
> # Direct software mixing plugin for digital (S/PDIF) output
> # on the nForce2 (hw:0,2)
> # Do not use this directly--it requires specific rate,
> # channels, and format
> pcm.dmix-digital {
> type dmix
> ipc_key 1235
> slave {
> pcm "digital-hw"
> period_time 0
> period_size 1024
> buffer_size 4096
> rate 48000
> }
> }
>
> # Control device (mixer, etc.) for the nForce2 card
> ctl.dmix-digital { type hw card 0 }
>
>
>
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
