fbdev is actually framebuffer driver for NVidia cards, so it does the right thing when it shows PCI ID of your GeForce. You want ivtv-fb module. Make sure you read the PVR350 section of Jarod's Howto for all the ivtv parameters:
http://wilsonet.com/mythtv/fcmyth.php?SID&expandables=closed&ivtv=open&pvr350out=open#capture On 18 Jun 2005 17:36:55 -0700, Jim Reith <[EMAIL PROTECTED]> wrote: > > I've set up a KnoppMyth box that includes an AGP GeForce2 card with TV out > and a PVR-350 and want to output my video through the PVR-350 tv out. I'm > new to KnoppMyth (but not linux) and have been playing with this new machine > for about a week now, have looked at all the PRV-x50 notes and think I have > figured out the problem but not a solution. I believe I am having problems > because my AGP graphics card has video out and I want to use the 350's video > out. (note, the IR Remote also isn't working but I think that might be > partially due to this pvr-350 setup issue) The error I get starting the X > server is: > > > > (EE) open /dev/fb1: No such device > (EE) No devices detected. > > > > > Just above this in the log I see > > (II) FBDEV: driver for framebuffer: fbdev, afb > (II) Primary Device is: PCI 03:00:0 > > > > > lspci -v gives: > > 0000:01:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 > MPEG-2 Encoder (rev 01) > Subsystem: Hauppauge computer works Inc. WinTV PVR-350 > Flags: bus master, medium devsel, latency 64, IRQ 16 > Memory at d8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > > 0000:03:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 > MX/MX 400] (rev b2) (prog-if 00 [VGA]) > Subsystem: Micro-Star International Co., Ltd.: Unknown device 8523 > Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 5 > Memory at e0000000 (32-bit, non-prefetchable) [size=16M] > Memory at d0000000 (32-bit, prefetchable) [size=128M] > Capabilities: [60] Power Management version 2 > Capabilities: [44] AGP version 2.0 > > > > > My XF86Config-4 specifies: > > Section "Device" > Identifier "Hauppauge PVR 350 iTVC15 Framebuffer" > Driver "fbdev" > > > ### change fb1 to whatever number you got in the previous section > Option "fbdev" "/dev/fb1" > > > ### change the busid to whatever is reported by lspci. Note that > ### output of lspci is hex, so add a preceding "0x" to the BusID > BusID "1:0x0a:0" > EndSection > > > > > my /etc/mythtv/modules/ivtv is set to: > > alias char-major-81 videodev > alias char-major-61 lirc_i2c > #options ivtv debug=1 > #options tuner type=2 > options msp3400 once=1 simple=1 > install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe > saa7115; /sbin/modprobe --ignore-install ivtv > remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r > saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner > > > > > My ivtv init section (I've included the saa7115 messages from after the end > of the init) from dmesg is: > > Linux video capture interface: v1.00 > saa7115: starting probe for adapter SMBus nForce2 adapter at 5000 (0x0) > saa7115: starting probe for adapter SMBus nForce2 adapter at 5500 (0x0) > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc3j) loading > ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 16 (level, high) -> IRQ 16 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > ivtv: i2c attach [client=(tuner unset),ok] > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > msp34xx: ivtv version > msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler > (G) no-thread mode > msp34xx: $Id$ compiled on: May 24 2005 00:43:28 > ivtv: i2c attach [client=MSP3448W-A2,ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[0],ok] > saa7115: status: (1E) 0x00, (1F) 0xc0 > ivtv: i2c attach [client=tveeprom,ok] > tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 2947528 > tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio_processor = MSP3440 (type = 11) > ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad1598, > Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > saa7127: Ignoring new-style parameters in presence of obsolete ones > saa7127: video encoder driver version V 0.3 loaded > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[0],ok] > ivtv: Encoder revision: 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 9 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total > ivtv: Registered v4l2 device, streamtype 5 minor 16 > ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 228 > ivtv: Create stream 7 > ivtv: Registered v4l2 device, streamtype 7 minor 232 > ivtv: Create DMA stream 8 > ivtv: Registered v4l2 device, streamtype 8 minor 48 > ivtv: Setting Tuner 47 > tuner 2-0061: type set to 47 (LG NTSC (TAPE series)) > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to NTSC. > ivtv: ivtv_enc_thread: pid = 3396, itv = 0xf91a3aa0 > ivtv: ivtv_dec_thread: pid = 3397, itv = 0xf91a3aa0 > saa7115: decoder set norm NTSC > saa7115: set audio: 0x01 > saa7127: Setting Encoder Video Standard > saa7127: Set NTSC Video Mode > saa7127: Selecting NTSC video Standard > ivtv: Initialized WinTV PVR 350, card #0 > ivtv: ==================== END INIT IVTV ==================== > saa7115: decoder disable output > saa7115: decoder set input (0) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 1, output 1 > saa7115: decoder enable output > saa7115: decoder set size > eth0: no IPv6 routers present > saa7115: decoder disable output > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 3, output 1 > saa7115: decoder enable output > saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0 > saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 > saa7115: decoder disable output > ts: Compaq touchscreen protocol output > saa7115: decoder enable output > > > > > Here's the entire XFree86.0.log file > > <deleted so the message would be under 40kb> > > Anything else that would be helpful? > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > -- Fedor G Pikus ([EMAIL PROTECTED]) http://www.pikus.net http://wild-light.com _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
