I did notice that the was this line in the output: ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!!
How do I change that?? > OK, > I need some help. I have two 250's and a 500mce in the same machine and > I am only getting static. Below is some info that may be of some help. I > have searched the mailiing list and have gotten a few ideas for the > modprobe.conf file from there but I am just lost. > > I know there is some little thing that I am missing. Please help as it > is much appreciated. > > rpm info > -------- > ivtv-0.3.7d-95.rhfc2.at > ivtv-firmware-enc-2.04.024-4.at > ivtv-firmware-dec-2.02.023-4.at > perl-Video-ivtv-0.13-6.rhfc2.at > perl-Video-ivtv-0.13-7.rhfc2.at > ivtv-firmware-audio-0.0.1-1.at > ivtv-kmdl-2.6.10-1.771_FC2-0.3.7d-95.rhfc2.at > > > modprobe.conf > -------------- > # ivtv modules setup > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-81-2 ivtv > alias char-major-81-3 ivtv > alias tveeprom tveeprom-ivtv > alias tuner tuner-ivtv > alias msp3400 msp3400-ivtv > options cx25480 i2c_enable=-1,-1,1,1 no_black_magic=1 > options saa7115 i2c_enable=1,1,-1,-1 > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc3j) loading > ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3 ivtv: > In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC15 based chip > ivtv: XXX PCI device: 0x2501 vendor: 0x8086 > msp34xx: ivtv version > ivtv: i2c attach [client=MSP3448W-A2,ok] > ivtv: i2c attach [client=tveeprom,ok] > ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model > 0x00a51450, Revision 0x00000000 > ivtv: NTSC tuner detected > ivtv: Radio detected > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > ivtv: i2c attach [client=saa7115,ok] > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes > total ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > total ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Setting Tuner 2 > tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by > ivtv i2c driver #0 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to NTSC. > ivtv: ivtv_enc_thread: pid = 3989, itv = 0xe0c591a0 > ivtv: Initialized WinTV PVR 250, card #0 > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC16 based chip > ivtv: XXX PCI device: 0x2501 vendor: 0x8086 > msp34xx: ivtv version > ivtv: i2c attach [client=MSP3448W-A2,ok] > ivtv: i2c attach [client=tveeprom,ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > ivtv: i2c attach [client=saa7115,ok] > ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model > 0x00891493, Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes > total ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > total ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Setting Tuner 2 > tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by > ivtv i2c driver #1 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to NTSC. > ivtv: ivtv_enc_thread: pid = 4050, itv = 0xe0c6d640 > ivtv: Initialized WinTV PVR 250, card #1 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ivtv: XXX PCI device: 0x2501 vendor: 0x8086 > ivtv: i2c attach [client=wm8775,ok] > ivtv: i2c attach [client=tveeprom,ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) > ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > 0x00914652, Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: i2c attach [client=cx25840,ok] > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes > total ivtv: Registered v4l2 device, streamtype 0 minor 2 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 34 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 226 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > total ivtv: Registered v4l2 device, streamtype 3 minor 26 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 66 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 > ivtv: Switching standard to NTSC. > ivtv: Initialized WinTV PVR 150, card #2 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ivtv: ivtv_enc_thread: pid = 4125, itv = 0xe0c81ae0 > ivtv: XXX PCI device: 0x2501 vendor: 0x8086 > ivtv: i2c attach [client=wm8775,ok] > ivtv: i2c attach [client=tveeprom,ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #3 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #3 (0x10005) > ivtv: i2c attach [client=cx25840,ok] > ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > 0x00914652, Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes > total ivtv: Registered v4l2 device, streamtype 0 minor 3 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 35 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 227 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > total ivtv: Registered v4l2 device, streamtype 3 minor 27 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 67 > ivtv: Setting Tuner 57 > tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #3 > ivtv: Switching standard to NTSC. > ivtv: Initialized WinTV PVR 150, card #3 > ivtv: ==================== END INIT IVTV ==================== > > > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
