On 01/11/05, Marty Ravell <[EMAIL PROTECTED]> wrote: > I started messing with my lirc config in order to get my serial transmitter > working and have somehow messed things up. Am wondering if these symptoms > ring bells for anyone. > > If I use irrecord to build an lircd.conf file it seems to work. I can test > it with irw and most buttons (not all) work. > > For some reason if I use the lircd.conf file suggested in Jarod's (most > excellent) guide I get nothing. > > This same suggested lircd.conf used to work fine before I messed with > things. > > I don't recall exactly what it was I did when I was trying to get the serial > transmitter working. The box didn't start acting up until it was rebooted > (much later). > > Any ideas where I start looking to track this down? > > I've had a couple of goes getting irrecord to build a new file which will > work but it does not seem all that accurate. Some buttons just refuse to > work (1, 5, etc)
Do you have all of your remotes defined in the same /etc/lircd.conf file? I have my actual remotes, and also the definition for my transmitter in the same file. Did you generate the config for the transmitter in normal or raw mode? Nick _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
