On 11/3/05, Robert Johnston <[EMAIL PROTECTED]> wrote:
Tried seeing what irw reports as you press keys on the remote?
I have now tried the command "irw", it reports absolutely nothing during those times when the following line is in effect (in /etc/modprobe.conf):
options lirc_atiusb unique=1 debug=1 mask=0x0002
I also tried mask=0x00FF - same results, still no "irw" output.
I have also noticed that the codes received, as noted in the system log,
do not match the codes in /etc/lircd.conf. The codes are close, differing in only one byte-position ( I checked only a few keys: 2 3 4 5).
Does this mean I have to run the "irrecord" command again, and then ADD the codes generated during that run to the codes already in /etc/lircd.conf ?
Or, REPLACE the existing /etc/lircd.conf with the newly-generated set of codes from re-running irrecord ?
If re-running "irrecord" is required every time the unit code ID is changed, my comment would be that changing IDs is not something I would want to do every day, or every week, or even every month!
--
MM
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
