|
I’m
looking for advice in moving channel data that I scan using dvbscan into myth
channel listing. I’ve
set up a capture card (dvb) as indicated in the setup guide. Adding
the hd3000 as a dvb device shows up and looks right in myth-setup. I can
use dvbscan/ and azap to select and tune into channels. Running dvbscan to
create a conf file works fine, However I
can’t for the life of me figure out how to get the frequencies and their
sub-channels imported into myth, AND mapped to existing channel listing
provided by zap2it. So far I’ve
tried to -import
the data using the channel.conf format. However this always errors indicating
that I don’t have valid data. (So on
this note, what is the proper format that myth expects for a channel.conf. What
would be defaults that work?) -Added a
new transponder with a selected frequency that has several sub channels that
work. Myth
scans and discovers the channels, but they end up not working. (Fact is that it
will actually lock up the DVB card, indicating that it’s unavailable.) ------------------------- Starting
up as the master server. 2005-11-02
15:43:58.942 New DB connection, total: 2 2005-11-02
15:43:59.001 DVB#0 Using DVB card 0, with frontend pcHDTV HD3000 HDTV. 2005-11-02
15:43:59.031 New DB connection, total: 3 2005-11-02
15:43:59.053 DVB#0 ERROR - Could not find dvb tuning parameters for transport 0 2005-11-02
15:43:59.058 DVB#0 ERROR - Failed to get channel options for channel 3. 2005-11-02
15:43:59.945 Program #0 not found in PAT! ------------------------- -Last
was to directly populate entries in the db. Updated channel and program table.
Also fails to work? I would provide the version number if I
knew what/where I could get the info. Thanks again. |
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
