On Wednesday 09 November 2005 1:31 am, Paul Fielding wrote: > Hi all, > > I'm setting up a new MythTV box using a PVR-350 and KnoppMyth, which I've > had good luck with before. This time around, however, I'm having audio > troubles. > > When myth is installed, after setting up ivtv and editing XF86, etc, I can > get MythTV to come up through my PVR-350 to a TV. At this point *before* > selecting "use PVR-350" in the settings, I can get TV to play audio. The > video is choppy as all get-out, I'm assuming because it's not using the > hardware encoding of the PVR-350 card, but audio works. > > Then, I select the PVR-350 in the settings, and TV becomes smooth as silk, > no doubt because hardware encoding is involved. *However*, I no longer get > audio. I can revert the setting and get audio back, but with choppy > video. I have not changed any other PVR-350 settings from defaults. > > For reference - I've got the audio out from the 350 patched through the > audio in and out again from the sound card. Works on my other MythTV > box.... > > Suggestions? > > regards, > > Paul
Choppy video playback: I had this same problem - it was because XV wasnt enabled... and XV wasnt enabled because I was using an old crappy firmware file, once i upgraded to the new ivtv firmware, XV worked fine, then playback worked fine... (without enabling the 350 TV-Out in the settings) James -- James Grant Lightbox Technologies Inc. http://www.lightbox.org 613-294-3670
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
