So this is the correct adapter I take it? Thanks for the link Paul. I need to get a few of these.
Ed On Tuesday, May 6, 2014 5:29:05 AM UTC-5, pbirkel wrote: > > See: http://www.newegg.com/Product/Product.aspx?Item=N82E16822998003 > > > > > On Tue, May 6, 2014 at 6:22 AM, David Fry <[email protected]<javascript:> > > wrote: > >> Hi Neil, >> >> as you have noted, most CF adapters out there have the IDE connector >> mounted in a way that is 'inverted' from our point of view, >> The CF adapter IDE connector should have the locating bump on the >> component side, *Most Don't.* >> John uses a adapter made by SyBa, these are available on Ebay if you >> search for 'syba cf adapter' >> alternatively you can run a IDE cable out to a Startech 3.5" Drive Bay CF >> adapter as I have done, these work fine also. >> >> >> http://www.ebay.co.uk/itm/StarTech-com-CF-Card-Reader-to-IDE-Adapter-35BAYCF2IDE-/111342844456?pt=UK_Computing_ComputerComponents_InterfaceCards&hash=item19ec8cfa28#ht_1133wt_1171 >> >> Regards >> >> David Fry >> >> On Tuesday, May 6, 2014 3:15:23 AM UTC+1, nbreeden wrote: >> >>> I've ran into an odd issue with IDE card. >>> >>> The card has been fully built out. >>> >>> Without the CF adapters installed the boards as expected. I'm able to >>> write to all 6 TIL311's correctly; probing around the board everything >>> looks as I would expect; the drive flip flop works etc. >>> >>> When I plug in a CF adapter the ID0..ID4 signals are pulled to VSS (8255 >>> Port A PA0..PA3 pins, CF adapters pins 11,13,15,17 ). It's definitely the >>> CF adapter pulling the 4 pins low. I have 3 CF adapters, all three do this; >>> both CF positions on the PCB result in the issue. >>> >>> I've swapped put the 8255 and the 74LS244s (U12 and 14). At this point >>> I'm lost. >>> >>> -Neil >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
