Middle of page at: http://s100computers.com/My%20System%20Pages/IDE%20Board/My%20IDE%20Card.htm
"I have been using the SyBA "SD-CF-IDE-DI IDE" adaptor (NewEgg Item# N82E16822998003)." So "John Recommends!" :->. On Tue, May 6, 2014 at 7:43 AM, Edward Snider <[email protected]> wrote: > So this is the correct adapter I take it? Thanks for the link Paul. > I need to get a few of these. > > Ed > > > On Tuesday, May 6, 2014 5:29:05 AM UTC-5, pbirkel wrote: > >> See: http://www.newegg.com/Product/Product.aspx?Item=N82E16822998003 >> >> >> >> >> On Tue, May 6, 2014 at 6:22 AM, David Fry <[email protected]> wrote: >> >>> Hi Neil, >>> >>> as you have noted, most CF adapters out there have the IDE connector >>> mounted in a way that is 'inverted' from our point of view, >>> The CF adapter IDE connector should have the locating bump on the >>> component side, *Most Don't.* >>> John uses a adapter made by SyBa, these are available on Ebay if you >>> search for 'syba cf adapter' >>> alternatively you can run a IDE cable out to a Startech 3.5" Drive Bay >>> CF adapter as I have done, these work fine also. >>> >>> http://www.ebay.co.uk/itm/StarTech-com-CF-Card-Reader- >>> to-IDE-Adapter-35BAYCF2IDE-/111342844456?pt=UK_Computing_ >>> ComputerComponents_InterfaceCards&hash=item19ec8cfa28#ht_1133wt_1171 >>> >>> Regards >>> >>> David Fry >>> >>> On Tuesday, May 6, 2014 3:15:23 AM UTC+1, nbreeden wrote: >>> >>>> I've ran into an odd issue with IDE card. >>>> >>>> The card has been fully built out. >>>> >>>> Without the CF adapters installed the boards as expected. I'm able to >>>> write to all 6 TIL311's correctly; probing around the board everything >>>> looks as I would expect; the drive flip flop works etc. >>>> >>>> When I plug in a CF adapter the ID0..ID4 signals are pulled to VSS >>>> (8255 Port A PA0..PA3 pins, CF adapters pins 11,13,15,17 ). It's definitely >>>> the CF adapter pulling the 4 pins low. I have 3 CF adapters, all three do >>>> this; both CF positions on the PCB result in the issue. >>>> >>>> I've swapped put the 8255 and the 74LS244s (U12 and 14). At this point >>>> I'm lost. >>>> >>>> -Neil >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "N8VEM-S100" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
