Josh could you provide me with a link to the COSMAC ELF exhibition. I like to provide "news" updates to such things on the S100Computers web site. Even though it's not S100 exactly, it's close enough!
Likewise to everybody else, please feel free to send on related news/meetings so others locally can be made aware of them. Will drop them in here:- http://s100computers.com/News%20Page.htm John From: [email protected] [mailto:[email protected]] On Behalf Of Fabio Battaglia Sent: Sunday, August 3, 2014 1:07 AM To: [email protected] Cc: Crusty OMO Subject: RE: [N8VEM-S100:4811] 8080 board, Firmware and break Hi Josh! Thanks for your work and dedication on this project. Can't wait to get back home and try the new firmware version. During these weeks I'll try to complete my cage/box for the S100 machine based on your card (and, hopefully, on Don's FPMini). Just yesterday I completed the 8 slot backplane which will be dedicated to this project. But as you can see in the attached pic this machine is still quite naked. Good luck with the COSMAC ELF exhibition! Fabio Hi Guys, I have been able to get CP/M 2.2 booting from the SD-Memory card. Please find the JAIR-Firmware V1.zip file on the wiki page. http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder <http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=S-100%20ALTAIR -IMSAI%208080%20CPU%20Board> ¶m=S-100%20ALTAIR-IMSAI%208080%20CPU%20Board It will boot CP/M 2.2 and give the "a>" prompt. (I thought it would be a capital A, but it's not.) It does not change to Drive B (haven't tested C or D with any serious investigations). When trying to change to drive B, CP/M attempts to access Track 0xFF Sector 0, which are not valid. Track should be between 0 and 76 (77 tracks in all) and Sector# should be between 1 and 26. I'm not sure how or where it's coded in the drive parameter table. Perhaps these are the previous values that just haven't been initialized properly? I will need to go deep into CP/M territory to resolve this issue, but don't want to keep you waiting for some sort of firmware. Further, I have updated the schematic with the latest changes and updated the Manual with all the ECO changes (see wiki page). There are 3 ECO's required: -Jumper for the SD card -Jumper for the disconnected IC-H7 (8T97) pin 15 -Change RP2 from 4.7K to 47K (to solve issues with 16550 UART and 82C50 UART). I must now unplug this project for 5 weeks. I am exhibiting a COSMAC ELF collection at VCF-MW in Chicago and have only 5 weeks to finish my preparations for this. Mr. Jack Rubin, I have your board packed with my RCA STUDIO II, see you at the show! Mr. Matthew Turner, Thank you again for the loan of your Super ELF. I will get to work on it in a priority sequence (it's about #7 on my list). Regards, Josh Bensadon -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
