Component Ref Desc Qty U14,U25 7400 2 U13,U16 7402 2 U15,U8,U10 74LS04 3 UI1,U3,U4,U6,U7 74LS05 5 U11,U12 74LS10 2 U15.5 7427 1 U9,U21 74LS30 2 U11,U18,U19,U22 74LS107 4 U23,U17,U20 74LS123 3 U24 8T97 OR 74LS367 1 U5 INTEL 8212 1 U26 LM7805 1 C1-2-5-8,11-35 .1uf filter caps 31 C3 1000pf Ceramic Disc (.001uf) 1 C4 .01UF Ceramic Disc 1 C9 .1uf Tantalum Capacitor 1 C10 .33 Tantalum Capacitor 1 R1 270k ¼ WATT 1 R2 200 OHM ¼ watt 1 RR7 47000 OHM 10 PIN RNET 1 RR1-3,5-6 220 OHM 10 PIN RNET 5 RR4 1000 OHM 10 PIN RNET 1
RED LED's 41 LHT GREEN LED 1 LRN AMBER LED 1 LRN YELLOW LED 1 CR1 1N914 DIODE 1 MICA INSULATOR 1 TO-220 HEAT SINK 1 HEAT SINK – SCREW, NUT, WASHER 1 CARD EJECTOR HANDLE W/PIN 2 SA15-12,7-4 NKK SPDT PADDLE – RED 8 SA11-8,3-0 NKK SPDT PADDLE - BLUE 8 EX,EXT CLR,SS NKK PADDLE, MOM CLOSED – BLUE 3 DEP, DEP NXT NKK PADDLE, MOM CLOSED – RED 2 RIBBON CABLE 16 CONDUCTOR 1 P2 16 PIN MALE DIP HEADER 2 JP1-6 2 POSITION .1 JUMPER PIN 6 JP1-6 2 POSITION .1 JUMPER BLOCK 6 14 Pin IC sockets 19 16 Pin IC sockets 6 24 Pin IC Socket 1 On Thu, Oct 2, 2014 at 6:57 PM, Don Caprio <[email protected]> wrote: > With or without mouser part numbers > > > On Thu, Oct 2, 2014 at 6:19 PM, JackRubin <[email protected]> > wrote: > >> Don, >> >> Is there some easy way to download the BOM as an Excel or CSV file? >> Thanks for all your work on this project! >> >> Jack >> >> *************************************** >> >> >> On Wednesday, October 1, 2014 10:00:07 PM UTC-5, Don Caprio wrote: >> >>> Attention FP Mini Builders, >>> >>> I was planning on getting the N8VEM Wiki updated with more details on >>> the >>> FP Mini project. The page is up there and has some details. Mainly the >>> BOM. >>> I have the workings of a user guide with build instructions and what the >>> jumpers >>> are used for. I have to admit that getting the boards shipped and >>> assembling the >>> parts kits have consumed all my free time. >>> >>> I encourage you to please contribute to the Wiki. I'm pretty sure there >>> are going >>> to be questions on how to make it work in all the diverse 8080/Z80 >>> systems. >>> Please keep in mind this is not an IEEE-696 compliant board. Some of the >>> jumpers >>> will help with that compatibility but your mileage may/will vary. >>> >>> I'm no expert on S-100 systems. I'll do my best to answer questions but >>> your best >>> bet is going to be to post to this group and use the collective wisdom >>> of us all. >>> >>> I've assembled my board with all the components that were/are shipped in >>> the kits so >>> I have the same experience as the kit builders. I'm hoping this >>> validates the parts >>> list and shakes out any trouble/discrepancies. Granted most of you are >>> still waiting >>> on switches so wont be able to complete or test the board. >>> >>> One modification I wanted to do was the 'Slow Step'. On the IMSAI CPA >>> the single >>> step switch operates the same in the up or down position. Slow step mod >>> changes >>> the 'up' position of single step to be a slow step. This mod will >>> require cuts and jumpers >>> to the board. If there is a volunteer thats interested in documenting >>> the PCB board >>> mods that would be great. These mods should be done before starting the >>> build. I'll >>> be posting the documentation for this mod on the wiki. >>> >>> Thank you. >>> >>> http://n8vem-sbc.pbworks.com/w/page/83591242/Bill%20of%20Materials >>> >>> -- >>> Don Caprio >>> [email protected] >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > ------------------------------- > Don Caprio [email protected] > http://www.uxpro.com > (925) 240-UNIX > -- ------------------------------- Don Caprio [email protected] http://www.uxpro.com (925) 240-UNIX -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
