It's from a spreadsheet I have.
I'll post a BOM text file on the wiki.
On 10/ 2/14 07:21 PM, Jack Rubin wrote:
That’s just fine – did you have to do this by hand or did I miss an
easy way to download from the wiki page?
Jack
*From:*[email protected]
[mailto:[email protected]] *On Behalf Of *Don Caprio
*Sent:* Thursday, October 02, 2014 8:58 PM
*To:* [email protected]
*Subject:* Re: [N8VEM-S100:5368] Re: FP Mini Builders
Component Ref
Desc
Qty
U14,U25
7400
2
U13,U16
7402
2
U15,U8,U10
74LS04
3
UI1,U3,U4,U6,U7
74LS05
5
U11,U12
74LS10
2
U15.5
7427
1
U9,U21
74LS30
2
U11,U18,U19,U22
74LS107
4
U23,U17,U20
74LS123
3
U24
8T97 OR 74LS367
1
U5
INTEL 8212
1
U26
LM7805
1
C1-2-5-8,11-35
.1uf filter caps
31
C3
1000pf Ceramic Disc (.001uf)
1
C4
.01UF Ceramic Disc
1
C9
.1uf Tantalum Capacitor
1
C10
.33 Tantalum Capacitor
1
R1
270k ¼ WATT
1
R2
200 OHM ¼ watt
1
RR7
47000 OHM 10 PIN RNET
1
RR1-3,5-6
220 OHM 10 PIN RNET
5
RR4
1000 OHM 10 PIN RNET
1
RED LED's
41
LHT
GREEN LED
1
LRN
AMBER LED
1
LRN
YELLOW LED
1
CR1
1N914 DIODE
1
MICA INSULATOR
1
TO-220 HEAT SINK
1
HEAT SINK – SCREW, NUT, WASHER
1
CARD EJECTOR HANDLE W/PIN
2
SA15-12,7-4
NKK SPDT PADDLE – RED
8
SA11-8,3-0
NKK SPDT PADDLE - BLUE
8
EX,EXT CLR,SS
NKK PADDLE, MOM CLOSED – BLUE
3
DEP, DEP NXT
NKK PADDLE, MOM CLOSED – RED
2
RIBBON CABLE
16 CONDUCTOR
1
P2
16 PIN MALE DIP HEADER
2
JP1-6
2 POSITION .1 JUMPER PIN
6
JP1-6
2 POSITION .1 JUMPER BLOCK
6
14 Pin IC sockets
19
16 Pin IC sockets
6
24 Pin IC Socket
1
On Thu, Oct 2, 2014 at 6:57 PM, Don Caprio <[email protected]
<mailto:[email protected]>> wrote:
With or without mouser part numbers
On Thu, Oct 2, 2014 at 6:19 PM, JackRubin <[email protected]
<mailto:[email protected]>> wrote:
Don,
Is there some easy way to download the BOM as an Excel or CSV file?
Thanks for all your work on this project!
Jack
***************************************
On Wednesday, October 1, 2014 10:00:07 PM UTC-5, Don Caprio wrote:
Attention FP Mini Builders,
I was planning on getting the N8VEM Wiki updated with more details
on the
FP Mini project. The page is up there and has some details. Mainly
the BOM.
I have the workings of a user guide with build instructions and
what the
jumpers
are used for. I have to admit that getting the boards shipped and
assembling the
parts kits have consumed all my free time.
I encourage you to please contribute to the Wiki. I'm pretty sure
there
are going
to be questions on how to make it work in all the diverse 8080/Z80
systems.
Please keep in mind this is not an IEEE-696 compliant board. Some
of the
jumpers
will help with that compatibility but your mileage may/will vary.
I'm no expert on S-100 systems. I'll do my best to answer
questions but
your best
bet is going to be to post to this group and use the collective
wisdom
of us all.
I've assembled my board with all the components that were/are
shipped in
the kits so
I have the same experience as the kit builders. I'm hoping this
validates the parts
list and shakes out any trouble/discrepancies. Granted most of you
are
still waiting
on switches so wont be able to complete or test the board.
One modification I wanted to do was the 'Slow Step'. On the IMSAI CPA
the single
step switch operates the same in the up or down position. Slow
step mod
changes
the 'up' position of single step to be a slow step. This mod will
require cuts and jumpers
to the board. If there is a volunteer thats interested in documenting
the PCB board
mods that would be great. These mods should be done before
starting the
build. I'll
be posting the documentation for this mod on the wiki.
Thank you.
http://n8vem-sbc.pbworks.com/w/page/83591242/Bill%20of%20Materials
--
Don Caprio
[email protected] <mailto:[email protected]>
--
You received this message because you are subscribed to the Google
Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout
<https://groups.google.com/d/optout>.
--
-------------------------------
Don Caprio [email protected] <mailto:[email protected]>
http://www.uxpro.com
(925) 240-UNIX
--
-------------------------------
Don Caprio [email protected] <mailto:[email protected]>
http://www.uxpro.com
(925) 240-UNIX
--
You received this message because you are subscribed to a topic in the
Google Groups "N8VEM-S100" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/n8vem-s100/niSywnz_tsE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
[email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
Don Caprio
[email protected]
--
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
