Might as well include p/n if you have them. Thanks! From: [email protected] [mailto:[email protected]] On Behalf Of Don Caprio Sent: Thursday, October 02, 2014 8:57 PM To: [email protected] Subject: Re: [N8VEM-S100:5367] Re: FP Mini Builders
With or without mouser part numbers On Thu, Oct 2, 2014 at 6:19 PM, JackRubin <[email protected]<mailto:[email protected]>> wrote: Don, Is there some easy way to download the BOM as an Excel or CSV file? Thanks for all your work on this project! Jack *************************************** On Wednesday, October 1, 2014 10:00:07 PM UTC-5, Don Caprio wrote: Attention FP Mini Builders, I was planning on getting the N8VEM Wiki updated with more details on the FP Mini project. The page is up there and has some details. Mainly the BOM. I have the workings of a user guide with build instructions and what the jumpers are used for. I have to admit that getting the boards shipped and assembling the parts kits have consumed all my free time. I encourage you to please contribute to the Wiki. I'm pretty sure there are going to be questions on how to make it work in all the diverse 8080/Z80 systems. Please keep in mind this is not an IEEE-696 compliant board. Some of the jumpers will help with that compatibility but your mileage may/will vary. I'm no expert on S-100 systems. I'll do my best to answer questions but your best bet is going to be to post to this group and use the collective wisdom of us all. I've assembled my board with all the components that were/are shipped in the kits so I have the same experience as the kit builders. I'm hoping this validates the parts list and shakes out any trouble/discrepancies. Granted most of you are still waiting on switches so wont be able to complete or test the board. One modification I wanted to do was the 'Slow Step'. On the IMSAI CPA the single step switch operates the same in the up or down position. Slow step mod changes the 'up' position of single step to be a slow step. This mod will require cuts and jumpers to the board. If there is a volunteer thats interested in documenting the PCB board mods that would be great. These mods should be done before starting the build. I'll be posting the documentation for this mod on the wiki. Thank you. http://n8vem-sbc.pbworks.com/w/page/83591242/Bill%20of%20Materials -- Don Caprio [email protected]<mailto:[email protected]> -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. For more options, visit https://groups.google.com/d/optout. -- ------------------------------- Don Caprio [email protected]<mailto:[email protected]> http://www.uxpro.com (925) 240-UNIX -- You received this message because you are subscribed to a topic in the Google Groups "N8VEM-S100" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/n8vem-s100/niSywnz_tsE/unsubscribe. To unsubscribe from this group and all its topics, send an email to [email protected]<mailto:[email protected]>. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
