i use about a capful now....i also do a n overnight soak once or twice a week...i also keep a cleaning chart to show state board.... u can never be to safe... i also use scrubbing bubbles between cleanings....
On May 10, 9:17 am, brenda <[email protected]> wrote: > Hi, i am in Ohio and bleach is great according to our state board... > my inspector says i do over kill and she was right,, i always used to > much and it ate away the blades on my motor...ha....so now i use less > bleach , run it thru for my 10minutes, drain it and then run the opi > spa cleaner thru it also... i also use the cuccio tabs when soaking > and it has helped with the wormies in the filter...... good luck... > "Brenda > > On May 9, 4:36 pm, Lisa Cianciotti <[email protected]> wrote: > > > > > Hi Techs, > > I have a whirlpool foot spa that I am getting ready to use in my studio > > and I have a questions about how to disinfect it. > > I have the OPI Spa Clean and have used that, now I am ready to use a > > disinfecting solution. The barbicide I have says to mix 2 ounces for > > every quart of water. If my spa holds 3 gallon...if I am figuring this out > > correctly...I have to use 24 oz of barbicide to disinfect for 10 minutes? > > That sounds like way too much and very expensive if I need to do this after > > every client. Am I not figuring this out correctly? > > What kind of disinfectants do those of you with whirlpool spas use and > > what is the proper amount to use? Can someone please help to clarify this > > for me?? > > > Thanks very much! > > Lisa Cianciotti > > Mount Pleasant, PA- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "NailTech" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/NailTech?hl=en -~----------~----~----~----~------~----~------~--~---
