I just did!!! You can get the papers at your local hobby and craft store in the model car department, they have white which you will have to cut very close to the edges, and clear. You can use any clip art and copy and paste to your computers works program . You will have to paste and resize, you will need to play around a bit as to get the correct sizes. And check your page layout before printing. Also the paper is only half what a regular sheet of paper is. The kit only comes with I think 6 sheets for $9.99. So you wanna get it right before printing on the sheets, print out first on a plain piece of paper to test. After you print them, let dry, then coat with a spray clear sealer, I have one from Krylon satin finish. Doesn't matter because you will be covering them with clear gel. Don't know how AC will work, if it takes the print off or not, I have not tried it. You can print up your own pictures as well, I did that wiht my Sis in Laws dog and put her on her nail.
Hope this helps! I can't wait to print up some Christmas clip art I got from Barnes and Nobles. Shannon On Oct 11, 10:36 pm, Heather Lackey <[email protected]> wrote: > Has anyone made your own decals using waterslide paper? > > Sent from my iPod -- You received this message because you are subscribed to the Google Groups "NailTech" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nailtech?hl=en.
