How would he inject his current 4x10 40g into the mux which is currently on a 
single LC cable?

Luke Guillory
Network Operations Manager

Tel:    985.536.1212
Fax:    985.536.0300
Email:  lguill...@reservetele.com

Reserve Telecommunications
100 RTC Dr
Reserve, LA 70084


The information transmitted, including attachments, is intended only for the 
person(s) or entity to which it is addressed and may contain confidential 
and/or privileged material which should not disseminate, distribute or be 
copied. Please notify Luke Guillory immediately by e-mail if you have received 
this e-mail by mistake and delete this e-mail from your system. E-mail 
transmission cannot be guaranteed to be secure or error-free as information 
could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or 
contain viruses. Luke Guillory therefore does not accept liability for any 
errors or omissions in the contents of this message, which arise as a result of 
e-mail transmission. .

-----Original Message-----
From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Faisal Imtiaz
Sent: Monday, June 19, 2017 2:02 PM
To: Colton Conor
Cc: nanog list
Subject: Re: DWDM Mux/Demux using 40G Optics

Answers in-line below.

If you  look at the CWDM Muxes (8 or 9 channel) you will notice a common 
configuration of

    Upgrade Port (expansion port)  + 1450 or 1470 to 1610nm

    in the DWDM muxes you will see  them listed as # of Port + 1310 pass thru 

These are exactly what you are looking for ..... :)

Reply via email to