Verify pass-through frequencies for the 1310 (or equivalent) for the passive 
mux in question. This would only work for a single channel. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 

Midwest-IX 
http://www.midwest-ix.com 

----- Original Message -----

From: "Luke Guillory" <[email protected]> 
To: "Faisal Imtiaz" <[email protected]>, "Colton Conor" 
<[email protected]> 
Cc: "nanog list" <[email protected]> 
Sent: Monday, June 19, 2017 2:13:10 PM 
Subject: RE: DWDM Mux/Demux using 40G Optics 

Faisal, 

How would he inject his current 4x10 40g into the mux which is currently on a 
single LC cable? 





Luke Guillory 
Network Operations Manager 

Tel: 985.536.1212 
Fax: 985.536.0300 
Email: [email protected] 

Reserve Telecommunications 
100 RTC Dr 
Reserve, LA 70084 

_________________________________________________________________________________________________
 

Disclaimer: 
The information transmitted, including attachments, is intended only for the 
person(s) or entity to which it is addressed and may contain confidential 
and/or privileged material which should not disseminate, distribute or be 
copied. Please notify Luke Guillory immediately by e-mail if you have received 
this e-mail by mistake and delete this e-mail from your system. E-mail 
transmission cannot be guaranteed to be secure or error-free as information 
could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or 
contain viruses. Luke Guillory therefore does not accept liability for any 
errors or omissions in the contents of this message, which arise as a result of 
e-mail transmission. . 

-----Original Message----- 
From: NANOG [mailto:[email protected]] On Behalf Of Faisal Imtiaz 
Sent: Monday, June 19, 2017 2:02 PM 
To: Colton Conor 
Cc: nanog list 
Subject: Re: DWDM Mux/Demux using 40G Optics 

Answers in-line below. 



If you look at the CWDM Muxes (8 or 9 channel) you will notice a common 
configuration of 

Upgrade Port (expansion port) + 1450 or 1470 to 1610nm 

in the DWDM muxes you will see them listed as # of Port + 1310 pass thru 
channel. 

These are exactly what you are looking for ..... :) 


Reply via email to