I looked, but I couldn't see anything that answers my question.
Please clarify.
thanks
Al
--- In [EMAIL PROTECTED], "Brian" <[EMAIL PROTECTED]> wrote:
> got to www.cnconabudget.com and have a look. cul brian f.
> ----- Original Message -----
> From: "arielnh56" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, December 01, 2004 1:06 PM
> Subject: [CAD_CAM_EDM_DRO] Low cost 6A stepper drivers on eBay
>
>
> >
> >
> > There are two vendors selling basic 6A stepper drivers on eBay.
> >
> > One has a website http://www.electronicutopia.com and is selling
> > them for under $25. Seems to be a basic full step driver with no
> > isolation or heatsink.
> >
> > The other is user "esreng". His boards are about $47 but do half
step
> > and have a heatsink.
> >
> > I am looking for drivers to drive ~200oz/in steppers for my
Shoptask
> > 3-in-1. The Shoptask has a 2:1 ratio on the stepper drive and a
10
> > tpi lead screw so one full step would be 0.00025", which is more
than
> > the accuracy of my Acme lead screws, I think, so I don't think I
need
> > half step or microstep drivers.
> >
> > If anyone has any experience with these drivers or vendors or any
> > other advice on these it would be most welcome. I am on a small
> > budget so these are very tempting.
> >
> > thanks
> >
> > Alastair
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: [EMAIL PROTECTED]
> >
> > Subscribe: [EMAIL PROTECTED]
> > Unsubscribe: [EMAIL PROTECTED]
> > List owner: [EMAIL PROTECTED],
[EMAIL PROTECTED],
> [EMAIL PROTECTED]
> > Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: [EMAIL PROTECTED]
Subscribe: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED]
List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you
have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister
site to the CCED group, as many of the same members are there, for OT subjects,
that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T
POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
