> > Pic of the machine are at http://plsntcov.8m.com/CNCrouter.htm > > > > ron ginger > > Looks like a nice Job on that machine. > The Y axses gantry is very sturdy designed. > However I could not help noticing that you have > Left the entire length of your X table unsupported. > This takes the advantage of the nice linear rails right > out. > A few slight changes about this would have made for a much > stronger machine capable of machining aluminum plates. > Maybe you don't need to have it stronger? > Otherwise very clean work, probably one of the better > machines out there. > Good Luck Since it's slow, and the pics loook good, I thought I'd offer a suggestion. Make a dust skirt to prevent chips from falling onto the rails. Just a long strip of plaqstic and some double stick tape and put that the lenght under the table. A larger one could be on the gantry if it prevented chips from falling onto the rails. But the think looks really nice ! Dave Addresses: FAQ: http://www.ktmarketing.com/faq.html FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ Post Messages: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. http://www.metalworking.com/news_servers.html http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
