Gives me a idea: Use an old alarm clock, or even a pendulum clock with
weights, that moves a disc with binary or BCD code, read by phototransistors
and neon lamps to drive a set of nixies. You can also use mechanical switch
contacts, but the use of neon bulbs will be more 'neonixie'....

eric 

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of [email protected]
Sent: zondag 22 januari 2012 15:12
To: [email protected]
Cc: [email protected]
Subject: [neonixie-l] Mechanical Timebase!

There is always a lot of discussion about various timebases for clocks on
this group. One I have never seen discussed is using a high quality watch or
clock movement. I have some real neat antique pocketwatches. I thought it
would be real neat to set up a pocket watch movement where you can see all
the works (It would have to be in a dust proof enclosure.)in operation. I
thought you could pick off the oscillations of the balance wheel using a
fiber optic through beam photoeye on one of the photoeyes made for detecting
tiny objects. I see these in my industrial maintenance work from time to
time. The watch could be set up with a electic winding mechanism.  With the
photoeye output (Usually 9-24 volt sourcing or sinking depending on the
photoeye.) all you would need is some divider circuits to produce your
timebase signal for a clock. Nixie, numitron etc.
See WIkipedia Balance Wheel. A good 17-23 jewel  watch movement sitting in
one position a  constant temperature can be very accurate.
                                                   Tim

--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/neonixie-l?hl=en-GB.

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/neonixie-l?hl=en-GB.

Reply via email to