On Friday, October 10, 2014 2:16:47 AM UTC-7, Paul Parry wrote: > > I have built lots of PV Electronics clocks 60+ and not had an issue with > any of them > First, I do not think there is a real problem. It looks like the case already has plenty of holes on the top and bottom, more than should be necessary for relatively simple consumer electronics operating at low frequencies. If there were any serious overheating, there would be some discoloration on the pc board at the hot spot, espcially after hundreds of hours of operation. However, if Darring built it from a kit, there could be a workmanship problem (looking at the pictures, there are details I would have done differently).
-- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/8e219c10-8f10-43c4-b8db-4b59b86b19dc%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
