Also do some tests where you raise the voltage to 200V with a correct anode resistor as some of the Russian datasheets mentions a minimum anode voltage via an anode resistor of 200V to get proper function, 180V is a bit low.
You can also try to connect all three of the anodes together, pins 4, 10 & 13 to see if it alters the behaviour, or use any of the pins 10 or 13 instead of the pin 4, just use the correct anode resistor and all will be fine. /Martin -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/68ead973-8d87-4602-98a1-92fe5d68f9f5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
