Nice! Thanks for reporting what happened when using the other anodes, that is good to add to the common knowledge!
There is a good document written by Burroughs which discusses multiplexing and special considerations for their Nixies here: http://worldpowersystems.com/archives/Burroughs/ the N101 document at the top, you will also find two more documents there that are well worth reading. Using a biasing network was very often done in early Russian designs if they included some switching of the Nixies but most designs used direct drive, usually by a KD155ID1. The Polyatron A-201 also uses a biasing network to make sure that the digits are off in the Nixies it drives, but also for making sure that the stepping of the Polyatron works smoothly when the current drawn by the Nixie varies between the different digits that are ignited. /Martin -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/096b34f1-9d96-48e8-b69b-49783c4025a3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
