I adjusted the voltage to 200V and used 22K as anode resistor. Adding the 
biasing network (47K for each cathode and then 150K to B+) did the trick. Now i 
see 52-57V on the different extinguished cathodes :D

I tried using the “No connect"-pins as anodes with varying success. The best 
readout is obtained by using the pin4 (at least on my tubes)

// Per.


> On 08 Jun 2015, at 00:19, Dekatron42 <[email protected]> wrote:
> 
> Also do some tests where you raise the voltage to 200V with a correct anode 
> resistor as some of the Russian datasheets mentions a minimum anode voltage 
> via an anode resistor of 200V to get proper function, 180V is a bit low.
> 
> You can also try to connect all three of the anodes together, pins 4, 10 & 13 
> to see if it alters the behaviour, or use any of the pins 10 or 13 instead of 
> the pin 4, just use the correct anode resistor and all will be fine.
> 
> /Martin
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "neonixie-l" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected] 
> <mailto:[email protected]>.
> To post to this group, send email to [email protected] 
> <mailto:[email protected]>.
> To view this discussion on the web, visit 
> https://groups.google.com/d/msgid/neonixie-l/68ead973-8d87-4602-98a1-92fe5d68f9f5%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/neonixie-l/68ead973-8d87-4602-98a1-92fe5d68f9f5%40googlegroups.com?utm_medium=email&utm_source=footer>.
> For more options, visit https://groups.google.com/d/optout 
> <https://groups.google.com/d/optout>.

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/5BEF9063-C418-4BAB-8EDA-5F411C5211C3%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to