Per the data sheet (http://www.tayloredge.com/storefront/SmartNixie/DataSheets/Datasheet_SmartNixie.pdf), all of the switches need to be set to the "ON" position = "0000" for the device to boot as slave zero = 0x10. All switches set to the off position boots the unit as the master in a 4 or 6 digit clock using the RTC as a time reference. See figure 19 and table 25 for programming example and register map respectively.
Note that the DIP switches are only read at the modules power up boot, so you can't set the inputs to zero after power up and expect the module to recognize the state. jt -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/ff70ba3b-5487-4de7-84eb-db61721d94d3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
