On Wednesday, February 21, 2018 at 7:43:27 AM UTC-8, nixiebunny wrote:
>
> The inrush current performs the important job of heating up the filament 
> so that it will glow. Don't expect an LED driver to work well. Experiment 
> with some low ohmage series resistors first.t 
> <https://groups.google.com/d/optout>.
>
It has been a long time and, technically, this applies to RCA numitrons and 
not necessarily the Russian clones.  ISTR that they were designed to be 
directly driven by a 7447 and a 5V power supply without needing any series 
current-limiting resistors.  One of the advertised advantages was that they 
could be read in direct sunlight, which was not true for the early LEDs.

I also recall that GE claimed that the life of an incandescent lamp was 
inversely proportional to the twelfth power of the applied voltage.  If you 
can extrapolate from household lighting running on 110VAC, you can expect 
the life of your numitrons to be increased by about 4X by adding a series 
diode to drop the applied voltage by about  0.6V.

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/9b2c7318-9933-48f9-be33-32df64f50a6c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to