Be careful about the inrush current when energizing the filaments; the cold resistance is around 2.8 ohms, whereas hot is around 7 ohms. So, with a 1.1V supply, your surge-current will be about 400mA unless you use circuit tricks to lower it.
I use a series resistor + fuse and drive from a 2.5V transformer; my peak current is around 250mA, and 180mA operating. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/876362d4-30ef-42ed-b39d-9c59db3e018co%40googlegroups.com.
