I'm down for a set of boards for 6 B5971's when you get it done. I like the idea of newer software with wifi built in SoC. Also @Martin thanks for the links together. I still have that A-201 board and have been thinking it could be souped up some to run again.
Bill On Friday, August 28, 2020 at 1:45:47 AM UTC-7 Roman wrote: > Hi Michail, > > i know the B5971 smart sockets. l have all the parts and pcbs for the > smartsockets here - but i don't like the PIC. > So i decided to design my own pcbs and write my own software. The B5971 an > IN-23 are both having 13 cathodes - so i only have to choose different > cathode resistors and use a tube specific module on the hardware-side. > For the software i only have to change the specific 13-bit value for each > character (one bit for each segment). > So i only have to develop the hardware once for two rare types of > alphanumeric nixie tubes. > I've attached the actual development status of my pcbs. The HV-Booster is > missing. First, i've to find out the max current consumption of ten IN-23 / > B-5971 tubes with all segments on to choose the right power supply. > I think, that i'll put it on a seperate pcb for an easly exchange. > When i'm interpreting the datasheet correct, one tube should have > consumption of 9-10 mA @ 170-180V with all segments on. That's a lot. > I've build a special socket for the Nixie Tester Pro for my IN23 and > B5971 tube modules, then i can find out a good value for the cathode > resister value and also the total current consumption 170-180V. > > Does someone have the cathode resistor values for the IN-23 ? > > For the B5971 i've found: > > 47k = K10, K13 > > 22k = K8 > > 39k = K1, K2, K3, K4, K5, K6, K7, K9, K11, K12 > > These are the resistor values, that are used on the B5971 smartsockets > module. > > > M1 schrieb am Donnerstag, 27. August 2020 um 14:50:53 UTC+2: > >> Roman, >> >> >> >> I’m interested in the board you come up with, although I only have 6 of >> those tubes. >> >> >> >> You should also consider the B-5971 Smart Socket since you wanted to >> drive them individually. >> >> Like what I did here: >> >> https://youtu.be/dCdzolBSNM8 >> >> >> >> >> >> Michail Wilson >> >> 206-920-6312 <(206)%20920-6312> >> >> >> >> *From:* [email protected] <[email protected]> *On Behalf >> Of *Roman Hoffmann >> *Sent:* Sunday, August 23, 2020 9:04 AM >> *To:* [email protected] >> *Subject:* Re: [neonixie-l] Re: IN-23 "alphabet"? >> >> >> >> Thanks for the IN-23 character table! >> >> I've 11 pcs of these IN-23 tubes and i'll soon start an ESP32 based >> 10-digit display/clock with these tubes. >> >> >> >> Dekatron42 <[email protected]> schrieb am So., 23. Aug. 2020, 11:47: >> >> Here is an example of Cyrillic and Western characters. >> >> >> >> /Martin >> >> >> >> >> On Sunday, 23 August 2020 02:34:12 UTC+2, Terry Bowman wrote: >> >> I just snagged the last of 11 IN-23s for sale on eBay (a twelfth one was >> auctioned off first): >> >> >> >> >> https://www.ebay.com/itm/IN-23-ИН-23-ULTRA-RARE-USSR-11-segments-NIXIE-TUBE-with-2-dots-NEW-OLD-STOCK/224089043146 >> >> >> >> >> >> Definitely brand new. My question is what Cyrillic characters can it >> display? I assume that they would mainly be the first letters of words like >> "hours" and such. >> >> >> >> Anyone? >> >> >> >> >> >> Terry Bowman, KA4HJH >> "The Mac Doctor" >> >> https://www.astarcloseup.com/ >> >> >> >> “The book said something astonishing, a very big thought. >> It said that the stars were suns, only very far away. >> The Sun was a star, but close up.”—Carl Sagan, *Cosmos*, 1980 >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/2ccf21c4-c197-4a8b-903f-21c6fdacdfdao%40googlegroups.com >> >> <https://groups.google.com/d/msgid/neonixie-l/2ccf21c4-c197-4a8b-903f-21c6fdacdfdao%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/CAFg_fXXGHRh%3De%3DjzVFX5DsEPq%2B%2BJHX1Y_8z%2Bpw%2B3UjwbVjXUTw%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/neonixie-l/CAFg_fXXGHRh%3De%3DjzVFX5DsEPq%2B%2BJHX1Y_8z%2Bpw%2B3UjwbVjXUTw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9c4421b6-2876-4281-9fec-da933268dd03n%40googlegroups.com.
