Yes, that is correct - just hook the positive lead from the 436V supply to 
the common ground for the +5V supply.

All of the marked voltages are what I got when measuring my circuit and you 
should get close to those for a working circuit with the component values I 
used. You might have to increase or decrease the 436V supply as some A-201 
require a small adjustment to work properly, this way you can select A-201s 
that will work with the same voltage if you want to build a clock or 
something else with more of them. I guess that age, and long storage time, 
has affected them so that they will require a little bit different voltage 
between them but that might stabilize over time just as with other neon 
filled tubes that will require a burn-in time after storage.

Your PCB should be very similar to my design, there might be small 
differences in component values but not much as I based mine on photos from 
that PCB and also from the Russian patent.

/Martin


On Friday, 28 August 2020 17:35:03 UTC+2, Bill Notfaded wrote:
>
> @Martin am I reading the schematic correctly your improved design requires 
> +5VDC and -436VDC supplies?  All the other voltages are derived in circuit 
> and you labeled them for testing they are correct?  I'm also going to see 
> if I can track your circuit to the board I have now and see if it can be 
> somewhat retro-fitted.  It looks like for set-reset and carry you need two 
> switches that can switch the HV?  I think you helped me realize some parts 
> were removed so I need to track that down and make sure the existing pieces 
> are working still.
>
> Thanks,
>
> Bill
>
> On Friday, August 28, 2020 at 7:59:50 AM UTC-7 Bill Notfaded wrote:
>
>> I'm down for a set of boards for 6 B5971's when you get it done.  I like 
>> the idea of newer software with wifi built in SoC.  Also @Martin thanks for 
>> the links together.  I still have that A-201 board and have been thinking 
>> it could be souped up some to run again.
>>
>> Bill
>>
>> On Friday, August 28, 2020 at 1:45:47 AM UTC-7 Roman wrote:
>>
>>> Hi Michail,
>>>
>>> i know the B5971 smart sockets. l have all the parts and pcbs for the 
>>> smartsockets here - but i don't like the PIC.
>>> So i decided to design my own pcbs and write my own software. The B5971 
>>> an IN-23 are both having 13 cathodes - so i only have to choose different 
>>> cathode resistors and use a tube specific module on the hardware-side. 
>>> For the software i only have to change the specific 13-bit value  for 
>>> each character (one bit for each segment).
>>> So i only have to develop the hardware once for two rare types of 
>>> alphanumeric nixie tubes.
>>> I've attached the actual development status of my pcbs. The HV-Booster 
>>> is missing. First, i've to find out the max current consumption of ten 
>>> IN-23 / B-5971 tubes with all segments on to choose the right power supply. 
>>> I think, that i'll put it on a seperate pcb for an easly exchange. 
>>> When i'm interpreting the datasheet correct, one tube should have 
>>> consumption of 9-10 mA @ 170-180V with all segments on. That's a lot. 
>>>  I've build a special socket for the Nixie Tester Pro for my IN23 and 
>>> B5971 tube modules, then i can find out a good value for the cathode 
>>> resister value and also the total current consumption 170-180V.
>>>
>>> Does someone have the cathode resistor values for the IN-23 ?
>>>
>>> For the B5971 i've found:
>>>
>>> 47k = K10, K13
>>>
>>> 22k = K8
>>>
>>> 39k = K1, K2, K3, K4, K5, K6, K7, K9, K11, K12
>>>
>>> These are the resistor values, that are used on the B5971 smartsockets 
>>> module.
>>>
>>>
>>> M1 schrieb am Donnerstag, 27. August 2020 um 14:50:53 UTC+2:
>>>
>>>> Roman,
>>>>
>>>>  
>>>>
>>>> I’m interested in the board you come up with, although I only have 6 of 
>>>> those tubes.
>>>>
>>>>  
>>>>
>>>> You should also consider the B-5971 Smart Socket since you wanted to 
>>>> drive them individually.
>>>>
>>>> Like what I did here:
>>>>
>>>> https://youtu.be/dCdzolBSNM8
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> Michail Wilson
>>>>
>>>> 206-920-6312
>>>>
>>>>  
>>>>
>>>> *From:* [email protected] <[email protected]> *On 
>>>> Behalf Of *Roman Hoffmann
>>>> *Sent:* Sunday, August 23, 2020 9:04 AM
>>>> *To:* [email protected]
>>>> *Subject:* Re: [neonixie-l] Re: IN-23 "alphabet"?
>>>>
>>>>  
>>>>
>>>> Thanks for the IN-23 character table!  
>>>>
>>>> I've 11 pcs of these IN-23 tubes and i'll soon start an ESP32 based 
>>>> 10-digit display/clock with these tubes.
>>>>
>>>>  
>>>>
>>>> Dekatron42 <[email protected]> schrieb am So., 23. Aug. 2020, 11:47:
>>>>
>>>> Here is an example of Cyrillic and Western characters.
>>>>
>>>>  
>>>>
>>>> /Martin
>>>>
>>>>  
>>>>
>>>>
>>>> On Sunday, 23 August 2020 02:34:12 UTC+2, Terry Bowman wrote:
>>>>
>>>> I just snagged the last of 11 IN-23s for sale on eBay (a twelfth one 
>>>> was auctioned off first):
>>>>
>>>>  
>>>>
>>>>
>>>> https://www.ebay.com/itm/IN-23-ИН-23-ULTRA-RARE-USSR-11-segments-NIXIE-TUBE-with-2-dots-NEW-OLD-STOCK/224089043146
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> Definitely brand new. My question is what Cyrillic characters can it 
>>>> display? I assume that they would mainly be the first letters of words 
>>>> like 
>>>> "hours" and such.
>>>>
>>>>  
>>>>
>>>> Anyone?
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> Terry Bowman, KA4HJH
>>>> "The Mac Doctor"
>>>>
>>>> https://www.astarcloseup.com/
>>>>
>>>>  
>>>>
>>>> “The book said something astonishing, a very big thought.
>>>> It said that the stars were suns, only very far away.
>>>> The Sun was a star, but close up.”—Carl Sagan, *Cosmos*, 1980
>>>>
>>>>  
>>>>
>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "neonixie-l" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to [email protected].
>>>> To view this discussion on the web, visit 
>>>> https://groups.google.com/d/msgid/neonixie-l/2ccf21c4-c197-4a8b-903f-21c6fdacdfdao%40googlegroups.com
>>>>  
>>>> <https://groups.google.com/d/msgid/neonixie-l/2ccf21c4-c197-4a8b-903f-21c6fdacdfdao%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "neonixie-l" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to [email protected].
>>>>
>>>> To view this discussion on the web, visit 
>>>> https://groups.google.com/d/msgid/neonixie-l/CAFg_fXXGHRh%3De%3DjzVFX5DsEPq%2B%2BJHX1Y_8z%2Bpw%2B3UjwbVjXUTw%40mail.gmail.com
>>>>  
>>>> <https://groups.google.com/d/msgid/neonixie-l/CAFg_fXXGHRh%3De%3DjzVFX5DsEPq%2B%2BJHX1Y_8z%2Bpw%2B3UjwbVjXUTw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/5263f77f-aa67-4ced-be6e-460da4897603o%40googlegroups.com.

Reply via email to