@Martin am I reading the schematic correctly your improved design requires 
+5VDC and -436VDC supplies?  All the other voltages are derived in circuit 
and you labeled them for testing they are correct?  I'm also going to see 
if I can track your circuit to the board I have now and see if it can be 
somewhat retro-fitted.  It looks like for set-reset and carry you need two 
switches that can switch the HV?  I think you helped me realize some parts 
were removed so I need to track that down and make sure the existing pieces 
are working still.

Thanks,

Bill

On Friday, August 28, 2020 at 7:59:50 AM UTC-7 Bill Notfaded wrote:

> I'm down for a set of boards for 6 B5971's when you get it done.  I like 
> the idea of newer software with wifi built in SoC.  Also @Martin thanks for 
> the links together.  I still have that A-201 board and have been thinking 
> it could be souped up some to run again.
>
> Bill
>
> On Friday, August 28, 2020 at 1:45:47 AM UTC-7 Roman wrote:
>
>> Hi Michail,
>>
>> i know the B5971 smart sockets. l have all the parts and pcbs for the 
>> smartsockets here - but i don't like the PIC.
>> So i decided to design my own pcbs and write my own software. The B5971 
>> an IN-23 are both having 13 cathodes - so i only have to choose different 
>> cathode resistors and use a tube specific module on the hardware-side. 
>> For the software i only have to change the specific 13-bit value  for 
>> each character (one bit for each segment).
>> So i only have to develop the hardware once for two rare types of 
>> alphanumeric nixie tubes.
>> I've attached the actual development status of my pcbs. The HV-Booster is 
>> missing. First, i've to find out the max current consumption of ten IN-23 / 
>> B-5971 tubes with all segments on to choose the right power supply. 
>> I think, that i'll put it on a seperate pcb for an easly exchange. 
>> When i'm interpreting the datasheet correct, one tube should have 
>> consumption of 9-10 mA @ 170-180V with all segments on. That's a lot. 
>>  I've build a special socket for the Nixie Tester Pro for my IN23 and 
>> B5971 tube modules, then i can find out a good value for the cathode 
>> resister value and also the total current consumption 170-180V.
>>
>> Does someone have the cathode resistor values for the IN-23 ?
>>
>> For the B5971 i've found:
>>
>> 47k = K10, K13
>>
>> 22k = K8
>>
>> 39k = K1, K2, K3, K4, K5, K6, K7, K9, K11, K12
>>
>> These are the resistor values, that are used on the B5971 smartsockets 
>> module.
>>
>>
>> M1 schrieb am Donnerstag, 27. August 2020 um 14:50:53 UTC+2:
>>
>>> Roman,
>>>
>>>  
>>>
>>> I’m interested in the board you come up with, although I only have 6 of 
>>> those tubes.
>>>
>>>  
>>>
>>> You should also consider the B-5971 Smart Socket since you wanted to 
>>> drive them individually.
>>>
>>> Like what I did here:
>>>
>>> https://youtu.be/dCdzolBSNM8
>>>
>>>  
>>>
>>>  
>>>
>>> Michail Wilson
>>>
>>> 206-920-6312 <(206)%20920-6312>
>>>
>>>  
>>>
>>> *From:* [email protected] <[email protected]> *On 
>>> Behalf Of *Roman Hoffmann
>>> *Sent:* Sunday, August 23, 2020 9:04 AM
>>> *To:* [email protected]
>>> *Subject:* Re: [neonixie-l] Re: IN-23 "alphabet"?
>>>
>>>  
>>>
>>> Thanks for the IN-23 character table!  
>>>
>>> I've 11 pcs of these IN-23 tubes and i'll soon start an ESP32 based 
>>> 10-digit display/clock with these tubes.
>>>
>>>  
>>>
>>> Dekatron42 <[email protected]> schrieb am So., 23. Aug. 2020, 11:47:
>>>
>>> Here is an example of Cyrillic and Western characters.
>>>
>>>  
>>>
>>> /Martin
>>>
>>>  
>>>
>>>
>>> On Sunday, 23 August 2020 02:34:12 UTC+2, Terry Bowman wrote:
>>>
>>> I just snagged the last of 11 IN-23s for sale on eBay (a twelfth one was 
>>> auctioned off first):
>>>
>>>  
>>>
>>>
>>> https://www.ebay.com/itm/IN-23-ИН-23-ULTRA-RARE-USSR-11-segments-NIXIE-TUBE-with-2-dots-NEW-OLD-STOCK/224089043146
>>>
>>>  
>>>
>>>  
>>>
>>> Definitely brand new. My question is what Cyrillic characters can it 
>>> display? I assume that they would mainly be the first letters of words like 
>>> "hours" and such.
>>>
>>>  
>>>
>>> Anyone?
>>>
>>>  
>>>
>>>  
>>>
>>> Terry Bowman, KA4HJH
>>> "The Mac Doctor"
>>>
>>> https://www.astarcloseup.com/
>>>
>>>  
>>>
>>> “The book said something astonishing, a very big thought.
>>> It said that the stars were suns, only very far away.
>>> The Sun was a star, but close up.”—Carl Sagan, *Cosmos*, 1980
>>>
>>>  
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "neonixie-l" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to [email protected].
>>> To view this discussion on the web, visit 
>>> https://groups.google.com/d/msgid/neonixie-l/2ccf21c4-c197-4a8b-903f-21c6fdacdfdao%40googlegroups.com
>>>  
>>> <https://groups.google.com/d/msgid/neonixie-l/2ccf21c4-c197-4a8b-903f-21c6fdacdfdao%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "neonixie-l" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to [email protected].
>>>
>>> To view this discussion on the web, visit 
>>> https://groups.google.com/d/msgid/neonixie-l/CAFg_fXXGHRh%3De%3DjzVFX5DsEPq%2B%2BJHX1Y_8z%2Bpw%2B3UjwbVjXUTw%40mail.gmail.com
>>>  
>>> <https://groups.google.com/d/msgid/neonixie-l/CAFg_fXXGHRh%3De%3DjzVFX5DsEPq%2B%2BJHX1Y_8z%2Bpw%2B3UjwbVjXUTw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/f323b421-7b08-4680-919b-3a1f6355221dn%40googlegroups.com.

Reply via email to