Richard I'm interested in a full kit! With green-tint acrylic! It looks outstanding! I have a set of 6 tubes that I bought from Dalibor in late 2019 and was always going to build a board. And then 2020 and all the issues came and have never got back to it. This would be a good way to get them out of the boxes and put them to use! What is your time frame or do I need to contact you directly? Tom
On Sunday, February 13, 2022 at 9:27:47 AM UTC-5 martin martin wrote: > Now that's an excellent design! Now all I need is 6 of DF's tubes. He's > not made a video in a while.. hope all is well in the Nixie factory. > > > > ~ > *mcve...@gmail.com* > > > On Sat, Feb 12, 2022 at 9:47 PM Richard Scales <ric...@scalesweb.co.uk> > wrote: > >> >> I just made a version with green-tint acrylic for a special request. >> >> - Richard >> >> [image: Green1.jpg] [image: Green2.jpg] [image: Green3.jpg] >> On Wednesday, 19 January 2022 at 04:36:04 UTC Richard Scales wrote: >> >>> I have made a few different boards to support Dalibor Farny's tubes as >>> well as Z568 etc. though my solution consisted of a tube board on top of a >>> driver board. >>> I decided to make a single board version - given the amount of space >>> available between and around the tubes. >>> I still wanted to make the board as 'small' as possible with minimal >>> space around the tubes between front and back as well as to the left and >>> right. >>> The clock is based on the open source PRISM design so it features WiFi >>> connect, web GUI, NTP Sync with optional connection for a motion detect >>> device. >>> The result is a single board with all components underneath which extend >>> no more than 11mm below the PCB. >>> I also made a cut acrylic case which is a snug fit to emphasise the size. >>> The board also features Dalibors 'proper' drive method so each cathode >>> has its own series resistor in an effort to produce an 'even' glow across >>> all digits. >>> I've also constructed my own colon towers which feature underlighting, >>> the neons are mounted on a tall thin PCB (no pictures yet) though I only >>> have a handful of silver bases left - plenty of black ones (anodised >>> aluminium). >>> I am contemplating making bare boards or a full kit available - PM me if >>> interested.[image: UP4.jpg][image: UP3.jpg][image: UP2.jpg][image: >>> UP1.jpg] >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to neonixie-l+...@googlegroups.com. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/ac4736cf-163d-4e96-ab49-ea9485237fe2n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/neonixie-l/ac4736cf-163d-4e96-ab49-ea9485237fe2n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/b7805cb9-f390-4720-bd5b-928609b40efcn%40googlegroups.com.
