HI Richard... Please put me down for a kit or two when you make them available... I have the tubes and your design looks like a great clock in the making...
thanks db On Wednesday, February 16, 2022 at 6:36:34 AM UTC-6 Robert wrote: > Here’s the green acrylic that Richard mentioned populated with tubes > > > > Thanks > Rob > > On 14 Feb 2022, at 12:47, Bill van Dijk <[email protected]> wrote: > > > > Hi Richard, > > > > I use Lightburn (https://lightburnsoftware.com/ ) for my K40 laser > cutter, it can control a number of different laser cutters depending on the > control protocol it uses. It should not be difficult to find out if it > supports yours. > > > > Cheers, Bill > > > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Richard Scales > *Sent:* Sunday, February 13, 2022 11:42 PM > *To:* neonixie-l <[email protected]> > *Subject:* Re: [neonixie-l] Re: Low profile board for Dalbors tubes > > > > For the enclosures I use the following process: > > > > FIrstly I lay out the design using Solid Edge 2D drafting software from > which I export a DXF File. > > > > I use my own laser cutter (Triumph 6040) to cut the parts - their software > reads the DXF, I then control which parts I want to cut. > > > > Their software is called 'Lasersoft' http://www.triumphlaser.com > > > > I find that their software does absolutely everything that I would want it > to do - Can anyone recommend any alternatives or are all these products > tied to the cutters that the software is supplied with? > > > > - Richard > > > > > > On Sunday, 13 February 2022 at 23:09:54 UTC Terry Bowman wrote: > > > > On Feb 13, 2022, at 12:47 AM, Richard Scales <[email protected]> > wrote: > > > I just made a version with green-tint acrylic for a special request. > > > > What software are you using to design your enclosures? Who's cutting them? > Just curious. > > > > > > Terry Bowman, KA4HJH > "The Mac Doctor" > > https://www.astarcloseup.com > > > > “...the book said something astonishing, a very big thought. The stars, it > said, were suns but very far away. The Sun was a star but close up.”—Carl > Sagan, "The Backbone Of Night", *Cosmos*, 1980 > > > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/4be6ed9b-2e6e-4363-8cf2-90ec1c32684an%40googlegroups.com > > <https://groups.google.com/d/msgid/neonixie-l/4be6ed9b-2e6e-4363-8cf2-90ec1c32684an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/00d801d821a0%24fc68cc00%24f53a6400%24%40gmail.com > > <https://groups.google.com/d/msgid/neonixie-l/00d801d821a0%24fc68cc00%24f53a6400%24%40gmail.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9da0b964-0627-4564-a821-b1a33bd78b23n%40googlegroups.com.
