They work fine at 5V. Never had a problem with one at 5V.

But attention: ESP uses 3V3 and you might need to use a lever shifter (e.g. 
CD40109) to make it work.

On Monday, 3 March 2025 at 20:39:00 UTC+1 newxito wrote:

> I use the HV5622, which goes up to 220 V, I think there is also a PLCC 
> version. The disadvantages are the price and that it should  be operated 
> with 12V according to spec. However, I never had any problems using the 
> chip with 5V. 
> JBro63 schrieb am Montag, 3. März 2025 um 19:02:56 UTC+1:
>
>> Hi all,
>>
>> Group noob here, about to start build on a few different types of display 
>> using Nixie tubes and ESP32.
>>
>> Planning to use K155ID1 initially (as I have a bunch) with some IN-12 and 
>> IN14 tubes but want to also try HV driver such as the 5812 or 5530 so would 
>> welcome any comment on which is the best one to go for or an alternative. I 
>> don't intend to multiplex. Any driver would need to be DIP or PLCC.
>>
>> Have spent many hours looking at the schematics and designs of others, 
>> I'm grasping the basics but one frustration and evident gap in my knowledge 
>> is how to pick / calculate the correct component and its size or rating for 
>> anything other than the most basic circuit.
>>
>> For example, with a 180v supply, calculating the anode resistor for a 
>> tube based on the datasheet is straight forward enough as the maintaining 
>> voltage and current are known.
>>
>> When looking at something like the HV5812, many seem to use a 60 or 70V 
>> zener diode with a resistor to keep below the max for the chip but how do 
>> you determine the current needed for the driver, diode and load to be able 
>> to calculate the current limiting resistor? The diode datasheet is simple 
>> enough but I'm lost with the sheet for the HV5812.
>>
>> Thanks.
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion, visit 
https://groups.google.com/d/msgid/neonixie-l/01c47215-622c-40d4-bf18-4896f6717459n%40googlegroups.com.

Reply via email to