When I face this with my clients, I build an all
new supply in a suitable rack chassis using
appropriately rated industrial power supply
modules. The toughest part is usually sourcing
suitable cable and the proper connectors to
interface with the console in question. Any
competent tech near you should be able to do this.
Good luck,
Jeff
At 02:30 PM 4/16/2009, you wrote:
Thanks for your repply!!!, o have done this:
mike....no info about this mixer...buy second
hand power supply.....JML says: Sorry we have
nothing in that huge Amperage.....any
suggestions???? tips???? thanks a lot for your time!!!!!
> Date: Wed, 15 Apr 2009 14:02:21 -0400
> To: [email protected]
> From: [email protected]
> Subject: Re: NEOTEK: HI!
>
>
>
> Hi KB,
>
> Welcome to the group! My suggestion would be to contact Mike Stoika at
> Sytek (the current owner of Neotek) with the serial # of your console.
> There were more than a few versions of the S3 (A, B, C and several
> revisions of each) and it's very important to get the correct
> documentation. He can be reached at:
>
> [email protected]
>
> As far as building a power supply, best to first look at the prints of
> the version that went with the S3, then go from there. There are several
> rails: audio supply is bi-polar +/-18VDC, Meter supply is 35VDC
> unregulated, Logic supply is -25VDC and phantom power is +48VDC. I'm not
> familiar with the Elite supply to know if it is compatible.
>
> Be very careful with the master portions of the desk! Any problems in the
> logic circuits can result in difficult to trouble shoot issues at many
> other points in the console.
>
> Best of luck!
>
> Regards, Jim
>
>
> At 01:47 AM 4/15/2009, you wrote:
>
>
>>
>>----------
>>From: [email protected]
>>To: [email protected]
>>Subject: NEOTEK: HI!
>>Date: Wed, 15 Apr 2009 05:42:00 +0000
>>
>>AM NEW IN THIS...I REALLY NEED YOUR HELP, I HAVE IN MY HANDS NEOTEK SERIES
>>III CONSOLE, ALL UNWIRED, I NEED ELECTRONICS DIAGRAMS, IN SPECIAL...HOW TO
>>BUILD POWER SUPPLY FOR THIS CONSOLE, I KNOW THAT THE PSU FOR ELITE, CAN
>>WORK WITH SERIES III ONLY CHANGING 35 TO 33 VOLTS, BUT I NEED ELECTRONIC
>>AND SCHEMS ABOUT THIS CONSOLE, LET ME KNOW IF THERES A COST FOR THIS INFO,
>>PLEASE!!!!!
>>
>>
>>THE BEST FOR YOU.
>>
>>
>>KB
>>
>>
>>----------
>>No reenvíes ni hagas caso de mails
>><http://www.windowslive-hotmail.com/protectyourself/es/default.htm>donde
>>pidan tu contraseña
>>
>>----------
>>Actualiza tu Perfil de Windows Live y cuéntale al mundo quién eres
>
>
> ------
>
> View the list online at: http://www.mail-archive.com/[email protected]
>
> You can unsubscribe at anytime by sending an
email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If
you have any difficulties, or questions
--please send an email to mailto:[email protected].
>
> The Neotek list is lovingly hosted by
Catapult Web. Remember that any message or
reply sent to the list will be automatically forwarded to all subscribers.
>
> Vive Le Neotek!
>
> Thanks.
----------
Actualiza tu Perfil de Windows Live
<www.actualizatuperfil.com.htm>y cuéntale al mundo quién eres
