Hi KB,
Please send your posts to the list and forward the photos on as well.
I'm really not sure which version S3 you have and hope that someone else
will recognize it. The only prints I have are for the S3C, and I don't
think this is what you have. This may take a while.............
The "good news" is that at only 16 channels, it should work ok with the
"smaller" Neotek power supply; these come up now and then for not too much
(start to look on ebay, Craigs list, etc.) and could be modified to provide
the -25VDC for the logic. All the other rails are present and should be of
sufficient current. There may even be a list member that has one available.
Regards, Jim
At 01:05 AM 4/17/2009, you wrote:
Thanks again for your help!!! i have attached some pics of my mixer, is
ALL unwired. Where i can get the electronic diagrams??? i know that
involves a cost. honestly, thanks a lot for your help!!!
The best for you,
KB
----------
Gana premios actualizando tu Perfil de Windows Live
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
