I think this should be fine for everything except the logic, I think!
Someone who knows more than me would have to confirm that. I'm not sure
how hard it would be to add logic to this supply.
Since all Neoteks were custom orders I think the power supplies had
more to do with the size and features of the particular console, as
opposed to each series having their own specific power supply.
For example I run my Series 1 consoles from a ps3 and a ps4. I think
most series 2's and 3's used the PS3 and older elite and elans used the
PS4. My console doesn't use logic so I didn't connect that but
everything else works great.
Also their is a great deal of variation in neotek power supplies just
like the consoles most of them seem to have little additions or
subtractions depending on what console they were originally packaged
with.
Hope that helps,
Jared
On Apr 20, 2009, at 12:55 AM, Armando Velazquez wrote:
Thanks!!!, now the question is: the power supply for Series I, can
works with series III with a little modification????
Thanks again!!!
> From: [email protected]
> Subject: Re: NEOTEK: FW: POWER SUPPLY FOR NEOTEK SERIES III
> Date: Sun, 19 Apr 2009 23:42:35 -0500
> To: [email protected]
>
> It seems there is a neotek supply on ebay at the moment. Looks like a
> similar vintage to that console. May be worth considering. I have no
> affiliation with the seller.
>
> take care,
> Jared
>
>
> On Apr 17, 2009, at 3:38 PM, Jim wrote:
>
> >
> > Hi KB,
> >
> > Please send your posts to the list and forward the photos on as
well.
> >
> > I'm really not sure which version S3 you have and hope that someone
> > else will recognize it. The only prints I have are for the S3C,
and I
> > don't think this is what you have. This may take a
while.............
> >
> > The "good news" is that at only 16 channels, it should work ok with
> > the "smaller" Neotek power supply; these come up now and then for
not
> > too much (start to look on ebay, Craigs list, etc.) and could be
> > modified to provide the -25VDC for the logic. All the other rails
are
> > present and should be of sufficient current. There may even be a
list
> > member that has one available.
> >
> > Regards, Jim
> >
> >
> >
> > At 01:05 AM 4/17/2009, you wrote:
> >> Thanks again for your help!!! i have attached some pics of my
mixer,
> >> is ALL unwired. Where i can get the electronic diagrams??? i know
> >> that involves a cost. honestly, thanks a lot for your help!!!
> >>
> >> The best for you,
> >> KB
> >>
> >>
> >> ----------
> >> Gana premios actualizando tu Perfil de Windows Live
> >>
> >>
> >>
> >>
> >>
> >
> >
> > ------
> >
> > View the list online at:
> > http://www.mail-archive.com/[email protected]
> >
> > You can unsubscribe at anytime by sending an email to
> > mailto:[email protected] with "unsubscribe neotek" in the
> > message body. If you have any difficulties, or questions --please
send
> > an email to mailto:[email protected].
> >
> > The Neotek list is lovingly hosted by Catapult Web. Remember that
any
> > message or reply sent to the list will be automatically forwarded
to
> > all subscribers.
> >
> > Vive Le Neotek!
> >
> > Thanks.
> >
>
> ------
>
> View the list online at:
http://www.mail-archive.com/[email protected]
>
> You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions --please send
an email to mailto:[email protected].
>
> The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically forwarded
to all subscribers.
>
> Vive Le Neotek!
>
> Thanks.
Si no está en Windows Live nunca pasó. Actualiza tu Perfil
