I have a 1/4" patch bay ( via snake wired to pin outs on the back).
They must be balanced because it will not pass signal with an
unbalanced connection. I just wondering why i can't get a condenser to
pass signal. no on board 48V but i have a working in line box. however
the input (mic on the patch bay) will not accept the output of the
48v inline supply. Not sure why but there has to be a good technical
explanation out there.
any ideas?
Jason
On 8-Jan-10, at 11:15 AM, Jared wrote:
Do you have a 1/4" patchbay? or are these on the back? I have never
seen a neotek with unbalanced mic inputs. So if your mic inputs are
1/4" then they should be balanced. If they where unbalanced you
would have a very different mic pre circuit than any neotek I'm
familiar with. However I could be wrong.
jared
-----Original Message-----
From: Jason Tawkin <[email protected]>
Sent: Jan 8, 2010 12:07 PM
To: [email protected]
Subject: Re: NEOTEK: series 1e mic inputs
Ok however there is no XLR inputs on the patch bay
just 1/4 mic inputs
are these balanced inputs?
On 8-Jan-10, at 11:03 AM, Jared wrote:
The mic input is balanced lo Z. You shouldn't need any sort of
adapter, just XLR to XLR.
Jared
-----Original Message-----
From: Jason Tawkin <[email protected]>
Sent: Jan 8, 2010 11:54 AM
To: [email protected]
Subject: NEOTEK: series 1e mic inputs
Just wondering if anyone knows what is going on with the mic inputs
on
a series 1.
I think it is a balancing issue that i am missing, any input
would be
appreciated.
It is my understanding that the series one consoles are
unbalanced. I
am just wondering what this has to do with impedance. I have only
been
able to use a dynamic mic with my boards pres. This is with an
xlr to
1/4 inch balanced cable. When i use i a xlr to unbalanced hi z
transformer it no longer works(i am guessing the something is
getting
cancelled out.). When using a condenser with an in line 48V box and
the same cable that worked for the dynamic (xlr to balanced 1/4
inch)
its will not receive the signal.
I am really in the dark about this stuff and any help would be
great
Thanks
Jason
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected]
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to mailto:[email protected]
.
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected]
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to mailto:[email protected]
.
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected]
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to mailto:[email protected]
.
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected]
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to mailto:[email protected]
.
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
