Hello Kyle,
I may have some balanced patchbays. How wide are your strips?
Regards,
Park Peters
Audio Park Recording
At 09:26 PM 1/26/10, you wrote:
Ike, what you describe is exactly what I have. When trs plugs are
inserted, the tip does not connect.
In any case, I'm still searching for balanced patchbays. I bought four
modules from a gentleman in Mexico, who evidently doesn't know what
balanced means. So I now have eight unbalanced modules that I can't
use, and the seller seems to have lost access to his email.
Anyway, I really need to get my patchbay together, so if anyone has a
suggestion, please share.
Thanks,
Kyle
On Jan 18, 2010, at 9:12 AM, Ike Zimbel <[email protected]> wrote:
Hi Steve,
What you are describing is a balanced patch bay that was wired in
an un-balanced config. I have seen patch bays on the older consoles
that actually only have two contacts, with the "Tip" contact being
where the "Ring" would be in a balanced jack.
best,
Ike
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions --please
send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
