Thanx Ike!
On more thing I found that has me quite perplexed:
On the back of my Valley people rack it says balance in, unbalanced
out. I have no idea why they did it that way but the really weird
part is that the terminals are marked +and- on one and ground on the
other. You just confirmed that the - or common should be tied to the
ground not the positive.
Are they wrong, was this some old way of doing it or is their rack
wired funny or what?
What do I do?
Does anyone here have a Valley People TR806 rack and know what I am
describing?
Thanx,
Jack
On Sep 8, 2010, at 2:44 PM, Ike wrote:
That should work. No need to re-wire the patch bay.
Best
Ike
Ike Zimbel
Zimbel Audio Ltd
416-720-0887
www.zimbelaudio.com
Sent from my iPhone
On 2010-09-08, at 4:36 PM, "[email protected]"
<[email protected]> wrote:
I seem to remember getting a lot of useful information from this
list the last time I addressed my unbalanced/balanced patch bay
issues so I was hoping someone here could answer a couple questions
I have along those same lines:
My patch bay and snakes are balanced and typically to convert the
1/4 connectors on the ends of the snakes that feed the patch pay
you just get new unbalanced connectors AND tie the common and
ground/shield together.
I will be plugging these snakes in to my unbalanced Series One for
it's direct outs, line ins etc and I wanted to make sure this was
an acceptable approach, have any of you tried this before?
I do not need to rewire to an unbalanced patch bay do I?
Thanx,
Jack
Jack Dean Stauss
No Static Pro Audio, Inc.
3083 N. California St.
Burbank Ca. 91504
818-729-8554
818-729-8551 Fax
www.nostaticav.com
[email protected]
Confidentiality Notice: This e-mail message, including any
attachments, is for the sole use of the intended recipient(s) and
may contain confidential and privileged information. Any
unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message
Jack Dean Stauss
No Static Pro Audio, Inc.
3083 N. California St.
Burbank Ca. 91504
818-729-8554
818-729-8551 Fax
www.nostaticav.com
[email protected]
Confidentiality Notice: This e-mail message, including any
attachments, is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. Any unauthorized
review, use, disclosure or distribution is prohibited. If you are not
the intended recipient, please contact the sender by reply e-mail and
destroy all copies of the original message
