Hi, Dave In snmpd.conf, I configure the user as following: createUser leelin MD5 "authpass" DES "privpass" group Groupv3 usm leelin view if2 included .1.3.6 access Groupv3 "" usm auth exact if2 if2 if2
if I also configure trapsess -v 3 -l authNoPriv -u leelin -a MD5 -A authpass -x DES -X privpass 172.18.100.148:162 then I can receive the V3 trap in MG-SOFT mibbrowser. If I don't configure the trapsess command, but configure the three table you told me before, then I can't receive the v3 trap. -----邮件原件----- 发件人: [email protected] [mailto:[email protected]] 代表 Dave Shield 发送时间: 2009年4月16日 16:02 收件人: Kang Chen 抄送: [email protected] 主题: Re: 答复: 答复: question about SNMPv3 trap 2009/4/16 Kang Chen <[email protected]>: > After I configure the > SNMP-TARGET-MIB::snmpTargetAddrTable > SNMP-TARGET-MIB::snmpTargetParamsTable > SNMP-NOTIFICATION-MIB::snmpNotifyTable > I can receive the v1 or v2c trap, > But I still can not receive the v3 trap. How have you configured the user "leelin" in the two sides? Dave ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
