2009/4/16 Kang Chen <[email protected]>: > In snmpd.conf, I configure the user as following: > createUser leelin MD5 "authpass" DES "privpass"
OK > group Groupv3 usm leelin > view if2 included .1.3.6 > access Groupv3 "" usm auth exact if2 if2 if2 These three lines probably aren't relevant (at least not for sending traps). They are concerned with controlling access *to* the agent, not outgoing requests. > if I also configure > trapsess -v 3 -l authNoPriv -u leelin -a MD5 -A authpass -x DES -X privpass > 172.18.100.148:162 > then I can receive the V3 trap in MG-SOFT mibbrowser. > If I don't configure the trapsess command, but configure the three table you > told me before, then I can't receive the v3 trap. Clear the three tables, and re-instate the "trapsess" line as above. Now walk the tables - what do you see? Clear the tables, and remove the "trapsess" line. Now create equivalent entries in the tables. Does it work or not? If not, walk the tables again - what do you see? Dave ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
