You may recall that I had asked for your assistance back in August with an attempt to load Net-SNMP 5.7.1.pre1 on several AIX 6.1 servers. Unfortunately I got pulled away from my project back then and am now, finally, getting back to it.
This time I started with the Net-SNMP 5.7.1 release using the tar.gz file from your download page. The `configure` and `make` were successful but I did run into a problem with the `make test`. All tests passed with the exception of T0072com2secunix_simple. This particular test produced errors which can be found in the attached snmpd.log file taken from the /tmp/T0072com2secunix_simple* directory. Looking back at my attempts in August I found that these same errors existed during those runs as well. Is this something that is a known problem? Any suggestions? Mike Lomax Principal Systems Engineer, Advanced Technology Solutions Office (909) 379-0669 Cell (951) 206-5852 michael.lo...@quadramed.com
<<image001.png>>
registered debug token netsnmp_udp_parse_security, 1 registered debug token netsnmp_udp6_parse_security, 1 registered debug token netsnmp_unix_parse_security, 1 /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 4: Error: Blank line following com2secunix token. /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 12: Error: Blank line following 67891123456789112x token. /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 14: Error: Blank line following 67891123456789112 token. Created directory: /tmp/snmp-test-T072com2secunix_simple-17563864/persist/mib_indexes /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 1: Error: missing CONTEXT_NAME parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 2: Error: missing NAME parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 3: Error: context name too long /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 4: Error: Blank line following com2secunix token. /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 5: Error: empty NAME parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 6: Error: security name too long /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 7: Error: missing NAME parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 8: Error: empty NAME parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 9: Error: missing SOCKPATH parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 10: Error: empty SOCKPATH parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 11: Error: missing COMMUNITY parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 12: Error: Blank line following 67891123456789112x token. /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 13: Error: missing COMMUNITY parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 14: Error: Blank line following 67891123456789112 token. /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 15: Error: missing COMMUNITY parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 16: Error: empty COMMUNITY parameter /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 17: Error: example config COMMUNITY not properly configured /tmp/snmp-test-T072com2secunix_simple-17563864/snmpd.conf: line 18: Error: community name too long netsnmp_unix_parse_security: <"12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234", ""> => "tu04e" netsnmp_unix_parse_security: <"cu05a", ""> => "tu05a" netsnmp_unix_parse_security: <"cu07a", "/dev/null/no/such"> => "tu07a" netsnmp_udp_parse_security: <"public", 127.0.0.0/255.0.0.0> => "comm1" NET-SNMP version 5.7.1 Received TERM or STOP signal... shutting down...
------------------------------------------------------------------------------ Better than sec? Nothing is better than sec when it comes to monitoring Big Data applications. Try Boundary one-second resolution app monitoring today. Free. http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________ Net-snmp-coders mailing list Net-snmp-coders@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
