Hi all,
I have two linux boxes (one with SLES9, one with CentOS5). On the SLES9 I upgraded the net-snmp to net-snmp-5.3.0.1-42.1 which I compiled from .srpm. On CentOS5 there is installed net-snmp-5.3.1-19.el5_1.3. On both boxes I have extended my snmpd.conf file as follows: ============================================================= extend .1.3.6.1.4.1.2021.570 hda /root/read_hdd.sh hda ============================================================= When I perform a snmpwalk on the CentOS box I'm getting this result: ============================================================= [EMAIL PROTECTED] /]# snmpwalk centos5 -v2c -cxxxx .1.3.6.1.4.1.2021.570 UCD-SNMP-MIB::ucdavis.570.1.0 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.2.1.2.3.104.100.97 = STRING: "/root/read_hdd.sh" UCD-SNMP-MIB::ucdavis.570.2.1.3.3.104.100.97 = STRING: "hda" UCD-SNMP-MIB::ucdavis.570.2.1.4.3.104.100.97 = "" UCD-SNMP-MIB::ucdavis.570.2.1.5.3.104.100.97 = INTEGER: 5 UCD-SNMP-MIB::ucdavis.570.2.1.6.3.104.100.97 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.2.1.7.3.104.100.97 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.2.1.20.3.104.100.97 = INTEGER: 4 UCD-SNMP-MIB::ucdavis.570.2.1.21.3.104.100.97 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.3.1.1.3.104.100.97 = STRING: "27" UCD-SNMP-MIB::ucdavis.570.3.1.2.3.104.100.97 = STRING: "27 0 27 0" UCD-SNMP-MIB::ucdavis.570.3.1.3.3.104.100.97 = INTEGER: 4 UCD-SNMP-MIB::ucdavis.570.3.1.4.3.104.100.97 = INTEGER: 0 UCD-SNMP-MIB::ucdavis.570.4.1.2.3.104.100.97.1 = STRING: "27" UCD-SNMP-MIB::ucdavis.570.4.1.2.3.104.100.97.2 = STRING: "0" UCD-SNMP-MIB::ucdavis.570.4.1.2.3.104.100.97.3 = STRING: "27" UCD-SNMP-MIB::ucdavis.570.4.1.2.3.104.100.97.4 = STRING: "0" ============================================================= When querying the SLES9 box I'm not getting the "97.1" values: ============================================================= [EMAIL PROTECTED] /]# snmpwalk sles9 -v2c -cxxxx .1.3.6.1.4.1.2021.570 UCD-SNMP-MIB::ucdavis.570.1.0 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.2.1.2.3.104.100.97 = STRING: "/root/read_hdd.sh" UCD-SNMP-MIB::ucdavis.570.2.1.3.3.104.100.97 = STRING: "hda" UCD-SNMP-MIB::ucdavis.570.2.1.4.3.104.100.97 = "" UCD-SNMP-MIB::ucdavis.570.2.1.5.3.104.100.97 = INTEGER: 5 UCD-SNMP-MIB::ucdavis.570.2.1.6.3.104.100.97 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.2.1.7.3.104.100.97 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.2.1.20.3.104.100.97 = INTEGER: 4 UCD-SNMP-MIB::ucdavis.570.2.1.21.3.104.100.97 = INTEGER: 1 UCD-SNMP-MIB::ucdavis.570.3.1.1.3.104.100.97 = STRING: "0" UCD-SNMP-MIB::ucdavis.570.3.1.2.3.104.100.97 = STRING: "33 0 0 0 0 0" UCD-SNMP-MIB::ucdavis.570.3.1.3.3.104.100.97 = INTEGER: 6 UCD-SNMP-MIB::ucdavis.570.3.1.4.3.104.100.97 = INTEGER: 0 ============================================================= And yes, the script is absolutely the same. So why are the results so different? Someone an idea why it doesn't show these ".1, .2,..."values? THX for your help! Christian ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
