Hi Wes Hardaker Once Zabbix returns failure for a particular user(azvision), we are checking through snmp walk as well. The results are Authentication failure.
Another observation is We deleted the user(azvision) and re-added to snmpd.conf and restarted snmpd. We have kept Zabbix aside and used only snmpwalk from linux machine Snmpwalk succeeds for 10-12 mins but again fails The behavior is seen only on this host and for this particular user. Other users created on this host are working fine. Kindly advise. Thank you Krishna Vivek -----Original Message----- From: Wes Hardaker <harda...@users.sourceforge.net> Sent: 04 June 2021 01:28 To: Krishna Vivek Vitta via Net-snmp-users <net-snmp-users@lists.sourceforge.net> Cc: Krishna Vivek Vitta <krishna.vivekvi...@citrix.com> Subject: Re: snmpwalk fails with SHA/AES [CAUTION - EXTERNAL EMAIL] DO NOT reply, click links, or open attachments unless you have verified the sender and know the content is safe. Krishna Vivek Vitta via Net-snmp-users <net-snmp-users@lists.sourceforge.net> writes: > Intitially, snmpwalk succeeds for 10-12 mins, but later it fails with > Authentication failure which is puzzling. We are clueless on how to > proceed ahead. Can you see if it works using snmpwalk and not just zabbix? > * Deleted the user and re-added again. The behavior is same after certain > time > * Changed the engine id. The behavior is same Make sure the engineid being reported is actually what you expect (don't know why it would be different, but...) Can you also see if the engineid boots and time values look good both incoming and outgoing? IE, are they syncing ok like they should? > * Deleted the user and re-added with MD5/DES. Polling is success without any > errors in long run. Very odd. -- Wes Hardaker USC/ISI _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
