> Hi
>
> Sorry if this has been dealt with before.
>
> I'm having hassles with an IOBlix card and Netconnect - this is using
> Demon.
>
> It dials the number, logs on, attaches my IP address then drops the
> line.
>
> Can't give the exact error as I don't have a debug trace of it to
> hand.
>
> No amount of playing around does anything - same result with 2
> different modems - One a motorola, the other, a USR 56k.
>
> No particular errors appear, just comes up with line hung up or some
> stuff.
>
> Any suggestions appreciated!
>
> Steve.
Had the same problem here. I assume it didn't like my rev 1b A1200 board. The
new drivers (37.7 & then 37.9) stopped it dropping the line, but it ran very
s-l-o-w-l-y.
I have since had to send it back to Chris, to try a Hypercom card instead. If
that doesn't work, I guess I'm destined to remain with the old serial port. :-/
So check you've got the latest drivers from the RBM website or Aminet. Also
make sure it's got the debugged versions of QueryIOBlix & SetupIOBlix, also on
Aminet. And what revision board do you have?
I'd be interested to hear if you get it working, and if so, at what speed,
because up until now, I seem to be the only one on this ML who's had a problem
with it.
Good luck.
----------------------------------------------------------------------------------
Using A1200 (rev 1B) with Blizzard 1230/50, 16Mb, 4Gb, Setpatch 43.6,
MagicXpress V90 via IOBlix 1200S
www.free4all.co.uk
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
