Gidday Adrian
on Sunday you reckoned that:
On 07-Nov-99, you wrote:
> Hello chaps
>
> I've got most of the N3 programs up and running now, Voyager is fast and
> stable but one thing puzzles me with my system. I have a Pace 56K modem, a
> Hypercom 3+ card and use the hypercom30Z.device but only get a connection
> speed of 31200/ARQ which I believe to be the default speed of the AMIGAs
> serial port. I've set the modem prefs in GENESiS to a much faster speed
> than that but I always get the same connection speed.
You might be using your modem's settings. If you can come to grips with the
modem manual, you can save the settings to the modem's NVRam and use ATZ as
your init string, which lodas your settings. Saving settings is probably
done with AT&W. Another set can be saved with AT&1! and recalled with ATZ1
Use Term or NCOmm to read the currently saved settings and write new ones.
Seing the current set up might be AT&V or ATI5 or something else.
<tsb>
A preposition is a bad word to end a sentence with.
<tsb>
<tsb>����������������������������������������������
<tsb>* Patrick Ford *
<tsb>*/# email/: [EMAIL PROTECTED] # *
<tsb>* /#fidonet/: 3:772/235.3# *
<tsb>����������������������������������������������
<tsb>
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
